User manual DOMENA FC 340 DATASHEET

[. . . ] - Young children should be supervised to ensure that they do not play with the appliance. HERE'S A TIP ­ You can use regular household granulated sugar in your RETRO COTTON CANDY MACHINETM. To add a little flavor and color, mix a pinch of your favorite pre-sweetened Kool-Aid® to the sugar. [. . . ] After washing and thoroughly drying the bowl, return the bowl to the base making sure it is LOCKED in to position. As you turn the bowl counterclockwise to LOCK, make sure it is secured and locked into position. (See page 10, Figure C) Return the extractor head assembly, making sure that the grooves are properly aligned to fit over the pegs on the stem. (See page 10, Figure B & C) Now you are ready to enjoy tasty, fluffy cotton candy from your RETRO COTTON CANDY MACHINETM. 1- First, find a stable surface near an electrical outlet before starting. When using electrical appliances, basic safety precautions should always be followed, including the following: - Read all instructions before operating this appliance. - To protect against electrical shock do not immerse cord, plug or any part of this unit in water or other liquids. - Close supervision is necessary when any appliance is used by or near children. - Unplug from outlet when not in use and before removing parts for cleaning. - DO NOT operate any appliance with a damaged cord or plug or if the appliance has been damaged in any manner. Return the appliance to the nearest repair shop for examination or repair or send back to company as stated in this booklet in the warranty. This retro looking cotton candy maker brings back memories of the classic diners from the 1950's. the RETRO COTTON CANDY MACHINETM is a technologically advanced cotton candy maker. Please take care of your machine by following these instructions and precautions. You can use a variety of flavored sugars with your RETRO COTTON CANDY MACHINETM. - The appliance manufacturer does not recommend the use of accessory attachments. - DO NOT leave unit unattended while in use or when plugged in to an outlet. - Check inside heating element compartment for foreign objects before switching to ON position. [. . . ] After cooling, remove the extractor head assembly by pulling straight up. NOTE: You may want to use pliers to get a good grip on the small center piece. UNLOCK bowl by turning clockwise and remove (See figure A & B & C above). [. . . ]