User manual DOMENA XPRIME 30

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DOMENA XPRIME 30. We hope that this DOMENA XPRIME 30 user guide will be useful to you.


DOMENA XPRIME 30 : Download the complete user guide (863 Ko)

Manual abstract: user guide DOMENA XPRIME 30

Detailed instructions for use are in the User's Guide.

[. . . ] € Never immerse the machine in water or other liquids, not even partially. € Place the iron horizontally on the iron rest marked SIT after each use. It can then be stored flat, without having to empty the water container. [. . . ] Please note : – Whilst you are ironing, the generator and iron heating pilot lights repeatedly go on and off. STEAM FLOW RATE CONTROL KNOB • Economy mode = : For light or very quick ironing sessions, we suggest you that you set the control dial to Eco Mode (reduced steam output). € Variable mode = : Adjust the flow control knob to suit the type of material being ironed. The volume of steam increases gradually as you turn the control knob towards the maximum ( ). € Maxi mode = : At maximum setting, there is an initial burst of steam lasting for several seconds. To repeat this process, wait for a few seconds to avoid any risk of spotting. Please note • Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. € If the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. € Select maximum steam output when : the unit is used for the first time, the water tank has been refilled, the anti-scale cartridge has just been changed. NOISE To ensure regular steam output performance, your unit is equipped with a pump which is activated each time the steam trigger is pressed. : - the appliance is used for the first time, - the water tank is empty, - the anti-scale cartridge has just been changed. VERTICAL IRONING • Your iron can also be used vertically to steam clothing on hangers or curtains, etc. € Move the iron from top to bottom, keeping the steam button pressed. STORAGE • After ironing, press the On/Off button to switch the appliance off. € If you lie the machine on its side, water from the container may spill out. - 20 OFF EMC Electronic Mineral Control The electronic EMC system measures the effectiveness of the antiscale cartridge by constantly monitoring the scale content of the filtered water. Anti-scale cartridge change indicator light A) When the anti-scale cartridge begins losing its effectiveness, the EMC system is activated. [. . . ] - Press the steam button several times - Go to your local dealer - Press the steam button several times. - Fill the reservoir - Insert the reservoir and push it fully in - Go to your local approved service dealer - Insert an anti-scale cartridge into the reservoir - No danger It will stop when steam trigger has been pressed a few times. - Remove the container and check that the anti-sediment cartridge has been correctly inserted Es kommt Dampf und Wasser heraus Das Gerät macht ein untypisches Geräusch Dampferzeuger macht ein knack- Geräusche Wasserbehälter läßt sich nicht ins Gehäuse hineinsteckens * Bei “andere Ursachen” und falls die Probleme mit den von DOMENA genannten Lösungsvorschlägen nicht gelöst werden können, suchen Sie bitte Ihren Händler auf. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMENA XPRIME 30




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMENA XPRIME 30 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.