User manual DYNATEK DS2-2

[. . . ] If there is any doubt, contact a professionally qualified technician and do not use the appliance. All packaging (plastic bags, polystyrene foam, staples, etc. ) should be kept out of reach of children as it presents a potential hazard. 4 The appliance must be installed by a qualified individual in compliance with the instructions provided. The manufacturer shall not be held responsible for any harm caused to individuals or animals, or for any damage to personal property resulting from incorrect installation. [. . . ] Exhausted appliances should be collected separately in order to optimise the cost of re-using and recycling the materials inside the machine, while preventing potential damage to the atmosphere and to public health. The crossed-out dustbin is marked on all products to remind the owner of their obligations regarding separated waste collection. For further information relating to the correct disposal of exhausted household appliances, owners may contact the public service provided or their local dealer. 3 INSTRUCTIONS FOR THE INSTALLER G B The following instructions should be carried out by a qualified technician to ensure that the appliance is installed, adjusted and technically serviced correctly in compliance with current regulations. must be carried out after the appliance has been disconnected from the electricity supply. Whenever it is necessary to maintain the electrical connections, proceed with extreme caution. The cooker has the following technical features: Class: 1 The maximum dimensions of the cooker are listed in the figure on page 2. To ensure the appliance operates correctly if installed inside a cabinet, the minimum distances indicated in fig. Furthermore, adjacent surfaces and the rear wall must be able to withstand a temperature of 65°C. There are 4 adjustable feet on the lower part of the cooker; these can be used to level the cooker when necessary. Warping resulting from bad positioning can alter the features and performance of the appliance. Fig. 10 4 Electrical connection THE APPLIANCE MUST BE EARTHED The appliance is designed to work with alternating current at the supply voltage and frequency indicated on the rating plate (situated on the rear part of the appliance and on the last page of the instruction booklet) or at the end of the instruction booklet. Make sure that the local supply voltage corresponds to the voltage indicated on the rating plate. If you wish more heat to be generated below or above (heat from the dish, turn the selector to position (heat from below + fan) or (heat from below), above). • With function (fan), cooking takes place through the action of air which has been preheated by a heating element and which is then circulated inside the oven by a fan. The oven heats up very quickly, therefore the foods you wish to cook may also be placed inside the oven as soon as it is switched on. • The “quick defrosting” function takes place without using the heating elements; only the oven light and the fan are activated. 8 TIMER (ELECTRIC OVEN) This feature allows you to program the oven or the grill as follows: • Delayed cooking start time with a specified duration; • Immediate start with a specified duration; • Timer. Button functions: : timer with hours and minutes; : cooking time; : cooking end time; : -: +: manual change; set cooking time (countdown); set cooking time (counting upwards from zero). When the text “auto” appears, this indicates that the cooking duration and the time it is due to finish have been programmed in automatic mode. At this point, the oven will switch on automatically at 12:30 and switch off after 30 will minutes. When the oven is switched on, the symbol be displayed for the entire cooking duration. The cooking duration can be displayed at any time by pressing the button, and the time it is due to finish may be displayed by pressing the button. Once cooking is complete, a buzzer will sound; to turn it off, simply press any button except the - and + buttons. Immediate start with a specified duration By programming just the duration (points 1 and 2 of the “Delayed cooking start time with a specified duration” section), cooking will begin immediately. [. . . ] • Do not use sharp objects to remove any crusted-on residue, as doing so may scratch the self-cleaning surface. • If the self-cleaning surfaces inside the oven are damaged or rendered unusable due to maintenance procedures being forgotten or performed incorrectly over a number of years, it is possible to request a self-cleaning panels kit, which can be used to coat the inside of the oven. To order this kit, please contact one of our authorised Assistance Centres. Outer areas of the oven: • Only perform this cleaning procedure when the oven is cold. [. . . ]