User manual DYSON DC43

[. . . ] OPERATING MANUAL GUIDE D’UTILISATION ASSEMBLY ASSEMBLAGE clik WASH FILTERS Wash filters with cold water at least every 3 months. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: This Dyson appliance is not intended for use by young children or infirm persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safely. Children should be supervised to ensure that they do not play with the appliance. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline. [. . . ] Empty as soon as the dirt reaches the level of the MAX mark – do not overfill. To remove the cyclone and clear bin unit, press down on the red button at the rear of the carrying handle on the cyclone. To release the dirt, press all the way down on the red button at the rear of the carrying handle on the cyclone. To minimize dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty. To refit: – close the clear bin base so it clicks into place –  ush the cyclone and clear bin unit into the main body of the appliance; p it will click into place – ensure the cyclone and clear bin unit is secure. Detach the red ‘C’ clip which is on the connection between the cleaner head and the appliance. On the cleaner head are two dials: turn each a quarter-turn counter-clockwise until it clicks. Put the cleaner head onto its back: – lift up the top edge of the base plate, so it rotates to the upright position – lift out. To refit the base plate: – f it the 3 lugs on the lower edge of the base plate into the 3 slots in the base of  the cleaner head – swing the upper edge of the base plate down; it will click into place. To secure the base plate: – press the base plate close to the cleaner head – secure the first dial by turning it a quarter-turn clockwise until it clicks  and engages – repeat with the second dial. Attach the cleaner head by sliding it on to the connections on the lower front part of the ball. Ensure the electrical plug on the cleaner head fits into the twin-block connection on the body of the appliance, which is directly above the airway. WARRANTY SERVICE • • • • • • • Please fill out and return the Warranty Form, or register online at www. Com Before service can take place, the terms of the warranty require that you contact the Dyson Helpline with your model name/number, serial number, date and place of purchase. Please keep your purchase receipt in a safe place to ensure you have this information. All work will be carried out by Dyson Canada Limited or its authorized agents. Any replaced defective parts will become the property of Dyson Canada Limited. Service under this warranty will not extend the period of this warranty. If your appliance is not functioning properly, please call the Dyson Helpline. Most issues can be rectified over the telephone by our trained Customer Care staff. This limitation is not allowed by some Provinces or Territories and so this limitation may not apply to you. Your remedy for breach of this warranty is limited to the warranty service described above. [. . . ] € • • • • • • SUMMARY OF COVER The warranty becomes effective at the date of purchase (or the date of delivery if this is later). You must provide proof of delivery/purchase before any work can be carried out on your appliance. All work will be carried out by Dyson Canada Limited or its authorized agents. Any parts which are replaced will become the property of Dyson Canada Limited. [. . . ]