User manual ELECTROLUX EES47320L

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] When AirDry opens the door, Beam-on-Floor might not be completely visible. The buttons on the control panel make a click sound when you press them. You can set the automatic selection of the most recently used programme and options. The latest programme that was completed before the appliance deactivation is saved. AirDry is automatically activated with all programmes other than Pre-rinse. Next button Use Previous and Next to switch between the basic settings and to change their value. Use OK to enter the selected setting and to confirm changing its value. How to enter setting mode You can enter setting mode before starting a programme. The lights related to the Previous, OK Make sure that the current level of the water softener agrees with the hardness of the water supply. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. Use Previous or Next to select the bar of the ECOMETER dedicated to the desired setting. The appliance returns to the programme The saved settings remain valid until you Use rough salt designed for dishwashers only. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. Activating options often increases the water and energy consumption as well as the programme duration. The appliance senses the type of load and adjusts a suitable wash cycle. During the cycle, the sensors operate several times and the initial program duration can decrease. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). During the countdown, it is not possible to change the delay time and the programme selection. 7 How to cancel the delay start while the countdown operates press and hold for about 3 seconds. If you cancel the delay start, you have to select the programme again. Make sure that there is detergent in the detergent dispenser before you start a new programme. 9 Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. [. . . ] For alarm codes not described in the table, contact an Authorised Service Centre. If you contact an Authorised Service Centre, you need to provide the product number code of your appliance. Before checking the PNC, make sure the appliance is in the programme selection. The display shows the PNC of your The appliance returns to the programme selection. [. . . ]