User manual ELECTROLUX ESI5545LOX

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] The display shows the current Press the on/off button to confirm the Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. With the use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected. the XtraDry option is a permanent option For all programmes other than and need not to be selected at every cycle. In other programmes the setting of XtraDry is permanent and it is automatically used in next cycles. If the option is not applicable to the program, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. The washing results are the same as with the normal programme duration. Make sure that the current level of the water softener agrees with the hardness of the water supply. If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. With this option you can set and save the programme that you use more frequently. How to set the MyFavourite programme Press and hold Program until the indicators that are related to the MyFavourite programme and options come on. Set the programme that you want to save You can also set applicable options together with the programme. Program and Delay until the indicators of the programme and the options flash for a few seconds. Start a programme to remove any processing residuals that can still be inside the appliance. When you start a programme, the appliance can take up to 5 minutes to Recharge the resin in the water softener. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use. Turn the cap of the salt container clockwise to close the salt container. After you fill the salt container, immediately start a programme to prevent corrosion. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity). [. . . ] Make sure that the pressure of the water supply is The display shows . Make sure that the filter in the inlet hose is not clog- Make sure that the inlet hose has no kinks or bends. Make sure that the filter in the outlet hose is not clog- Make sure that the interior filter system is not clog- Make sure that the drain hose has no kinks or bends. If the delayed start option is set, cancel the delay set- ting or wait for the end of the countdown. [. . . ]