User manual ELECTROLUX ESL8350RO

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] The display shows the current AirDry improves the drying results with less energy consumption. Do not try to close the appliance door within 2 minutes after automatic open. In case of presence of children, the AirDry system can be deactivated if you want to keep the door closed in the end of the cycle. To improve the drying performance refer to the XtraDry option or activate AirDry. The display shows the current This option allows to set and save the most frequently used programme. How to save the MyFavourite programme It is also possible to set applicable options together with the programme. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. If you select non compatible options, the appliance automatically deactivates one or more of them. With use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected. the XtraDry option is a permanent option For all programmes other than and need not to be selected at every cycle. Option is off and needs to be chosen In other programmes, the Automatically used in next cycles. Configuration can be changed at any How to set the MyFavourite programme The display shows the number and the duration of the programme. If options are saved together with the programme, the indicators related to the options are on. The washing results are the same as with the normal programme duration. by default , TimeManager is off , but it is possible to activate it manually. If the option is not applicable to the programme, the related indicator does not come on or it flashes quickly for a few seconds and then goes off. Make sure that the current level of the water softener agrees with the hardness of the water supply. This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: · 5 minutes after the completion of the After 5 minutes if the programme has Press the on/off button to activate the appliance. Press repeatedly until the display shows the number of the chosen programme. The indicators of the options Related to the MyFavourite programme are on. [. . . ] Make sure that the pressure of the water supply is The display shows . Make sure that the filter in the inlet hose is not clog- Make sure that the inlet hose has no kinks or bends. Make sure that the filter in the outlet hose is not clog- Make sure that the interior filter system is not clog- Make sure that the drain hose has no kinks or bends. If the delayed start option is set, cancel the delay set- ting or wait for the end of the countdown. [. . . ]