User manual ELEKTRO HELIOS KS4080

[. . . ] Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When installing the product, ensure that the plug is easily accessible. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. [. . . ] : This button is not available. 2. Insert and fix the battery with the plus(+) facing in the same direction as the plus(+) on the battery compartment. 3. Put the battery compartment on the remote control and turn it clockwise to close. Caution >> The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F). Do not disassemble the battery or dispose of it in fire. Coin Finger If you have long nail, do not open the battery compartment by using your finger. Or else, your nail would be broken. Caution >> 8 Getting Started Front Panel 1 Getting Started PORT. c VOL (+/-) Adjusts speaker volume. d F (FUNCTION) Selects the function and input source. (iPod/iPad, Bluetooth, PORT. IN, USB) Back Panel a b c USB Port Plays music file by connecting the USB device. DC IN12 V 02. 5A (AC adapter input) Getting Started 9 Top Panel 1 Getting Started a iPod/iPhone/iPad Dock Connects an iPod/iPhone/iPad. b Speaker 10 Getting Started Connecting the AC adapter 1 Getting Started 1. Connect the supplied AC power cord to the AC adapter. 3. Plug the AC power cord into an AC outlet. Battery Installation 1. Press and open the battery cover on the bottom of the unit. 2. Put six “AA size batteries” (not supplied) into the compartment making sure the 2 and 3 should be correctly positioned. 3. Close the battery cover. 2 yy Keep the batteries out of the unit when you do not use them for a long time. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA. Bluetooth Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. A2DP (Advanced Audio Distribution Profile) Note , , Note , , Operating 17 yy After searching for this unit on your Bluetooth device, pair the Bluetooth device with this unit. yy The sound may be interrupted when the connection interfered by the other electronic wave. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yy Although the distance between your Bluetooth and the set is less than 10m, there are obstacles between both, your Bluetooth device cannot be connected. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected. yy When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected. yy If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and the connection will be disconnected when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth. yy The device with Bluetooth wireless technology is disconnected, if you turn off the unit or put the device away from the unit more than 10m. [. . . ] yy The connection you’ve made may be disconnected if you select other application or change the setting of the connected device via BT app. yy If you place your iPod/iPhone/iPad into the dock of this unit whlie your iPod/iPhone/ iPad is connected to this unit by Bluetooth connection, the Bluetooth connection is deactivated. yy The Bluetooth connection of iPod/iPhone/ iPad is not activated whlie iPod/iPhone/iPad is placed into the dock of this unit. Note , , 2 Operating yy After connecting Bluetooth device to the unit by using iOS BT app. Then the function will be switched to IPOD/IPAD function automatically. [. . . ]