User manual EMTEC DVB-T ТЮНЕР S810

[. . . ] PVR Analog Digital TV ­ DVB-T Digital TV ­ ATSC User's Guide 507100-02-01-W-E-052507-09 ii Copyright © 2005-2007, Emtec Technology Corp. No portion of this document may be copied or reproduced in any manner without prior written permission from Emtec Technology Corp. (Emtec) Emtec has no warranties to this documentation and disclaims any implied warranty of merchantability or fitness for a particular purpose. All sample images and electronic files included in the documentation and distribution materials are copyrighted by their respective photographers and are not to be copied or reproduced in any manner. Trademarks Windows 2000, Windows XP, and Windows Vista are registered trademarks of Microsoft Corporation. [. . . ] Other settings on this tab will be disabled unless you select a device. Audio For Analog TV only, you can choose an audio device and source. Channel 30 Chapter 3 Menus and Settings On the Channel tab, you can set up the scan parameters to more efficiently scan for available television channels. Digital TV- DVB-T 31 Chapter 3 Menus and Settings Digital TV - ATSC Analog TV Country: Select the country you are in to have the television reception properly formatted. Minimum Frequency/Minimum Channel, Maximum Frequency/Maximum Channel: For Digital TV only, these settings can be changed to restrict the range that Scan will use to search for available channels. Signal: For Analog TV only, choose the source of the television signals. Scan/Auto Scan: Click to look for all available channels and list them. Export, Import: You can use these two functions to export or import a channel list so that you don't need to scan again when using other computers. Delete: For Digital TV ­ DVB-T only, you can remove a channel from the list by clicking this button. 32 Chapter 3 Menus and Settings Add or Update Channels: For Digital TV only, select the frequency range you want and then click Scan. This feature saves time by allowing you to rescan for channels to add or update without having to run through the whole frequency spectrum. Smart Scanning: For Digital TV - DVB-T, enabling this option can widen the scanning range to get improved results. If the first scan was not satisfactory, select this option and scan again. Channel Information/Edit Channel: You can edit the name for each channel. Type a name that may help you be clearer about what kind of show it is. Select the red heart next to a channel to make it a favorite. Favorite channels will be shown when you click the button on the channel list. Video On the Video tab, you can adjust the brightness and the color in the picture. Enable DeInterlace to prevent lines from appearing in the video. 33 Chapter 3 Menus and Settings Record 34 Chapter 3 Menus and Settings This tab will let you adjust your recording preferences. Record to the Hard Disk You are allowed to choose Saved type and Quality only when your input source is Analog. If your PVR doesn't support DDR, the Destination option will not be available. 35 Chapter 3 Menus and Settings The Quality option for Time Shifting is available only when the input source is analog TV. It is not available for DVB-T or ATSC. Record to DVD RW The Quality option is available when your PVR supports DDR and your input source type is Analog. For more information see: · Recording · Time Shifting Recording 36 Chapter 3 Menus and Settings You can choose a disc drive under Destination and a Folder for saving your recorded files and snapshots. The video will be automatically cut into separate files when the limit is reached. If your disk file system is FAT32, the maximum size of each file will be 4 GB. If your disk file system is NTFS, it will be equal to the space available on the specified disk. If the disc contains data, the Erase Disc button will be activated, allowing you to erase it before you proceed with the burning process. Scheduled recordings will be burned onto the hard disk even if you have selected the DVD burner as the output device. Before you click the Record button, Presto!If the DVD is not appendable, you will be prompted to erase any existing data. You can choose DVD or VCD with hard disk set as the output destination. [. . . ] Emtec will be held responsible only for the inherent problem of the device itself, but not for data loss, modification of the device or other indirect loss resulting from mal-operation of software, maintenance or other accidents. Emtec will not be held responsible for restoration of any personal data lost. Emtec reserves the modification right of any software, hardware and user manual of this device without prior notice. To make copies, publish, transfer, store in a traceable system, or translate to any other language without written authorization from Emtec is strictly prohibited. 53 Annexe Important 1. [. . . ]