User manual EMTEC DVB-T TUNER S800

[. . . ] As the DVB-T is a Hi-Speed device, you may receive the following message if it is plugged into an older USB 1. You will see several messages during the installation of the DVB-T dongle. Time Shift File Drive : Browse to the location where you would like to temporarily store time shifted programs (Also shows available maximum space available for Time Shift). ⷠRecord Video Folder : Browse to the location where recorded programs will be stored. [. . . ] If this is the case, you can click here to choose which stream you prefer. mute To mute the sound , press the mute button beside the volume indicator. When the sound is muted, a red line will appear through the speaker symbol. Snapshot To take a snapshot of the image currently on screen, click on this button. to later view the image , browse to the location of the snapshots (specified in the Setup screen) and double-click on the file. Normal viewing mode can be restored from the Windows taskbar (see note below). full Screen This option will display the TV full screen , and remove the control panel. Both the display screen and the control panel can be restored from the Windows taskbar as follows: · Note that if you are currently in Wallpaper mode, you will need to choose the Window Mode option to return to normal viewing mode. Live recording To record what is currently being shown on the screen, simply press the record button. Time Shift recording Time Shift recording is very useful when you are watching a programme and may have to leave just for a moment, for example if the phone rings. to activate Time Shift recording , simply press the time shift button. When you return to the computer, you can use the forward wind or rewind buttons to search within the recording. You can also press the play button to start watching the program or the pause button to pause what you are viewing. Please see next page for more information about the recording/playback control panel. The recording/playback control panel differs slightly from the standard control panel, with the following buttons added : Rewind Stop Pause Forward Wind Play Slider bar, shows how far through the recording you are. During playback, you can also drag the slider with the mouse rather than using the rewind / forward wind buttons. This will open the Schedule Record window, as follows : To schedule a recording, you will need to enter the following information : 1. The date Do this by clicking on a date in the top right-hand window, thus highlighting it by turning it blue. The start and end times of the recording These must be written in 24 hour format, e. The frequency of the recording For Frequency, you can choose the following from the drop-down list : 1 Time Record (will be displayed in orange), Daily Record (will be displayed in purple), or Weekly Record (will be displayed in green). [. . . ] You can then use the up/down arrow keys to navigate within the screen. Once the page you would like to go to is highlighted, press the action button again to go to that page. This means that you can get instant access to the list of programmes available to you. This will open up the following screen: You will find a list of channels down the left-hand side. [. . . ]