User manual EMTEC DVB-T TUNER S815

[. . . ] Minimum System Requirements - USB port - DirectX 9c - Windows 2000/XP - Pentium IV 1, 4GHz ou équivalent - 256MB RAM - DirectX 9c compatible sound card - DirectX 9c compatible video card - 32MB HDD space (installation only) Package Contents - DVB-T dongle - Software CD - Quickstart guide - Antenna * Please note that the antenna has a magnetic base and should not be placed near any items that can be affected by magnetic fields, for example, computer or TV screens, floppy disks, or credit cards. Please install all necessary software BEFORE connecting your DVB-T dongle. - You will be asked to choose the setup language, as follows : Choose a language and then click OK. [. . . ] Be sure to check the I accept the terms in the license agreement box, then click on Next. Once the software has finished being installed, you will be asked to restart the computer. Remove the cap from the DVB-T dongle, locate a free USB port on your computer and plug in the dongle. Once the computer recognises the new hardware, the New Hardware wizard will begin. As the DVB-T is a Hi-Speed device, you may receive the following message if it is plugged into an older USB 1. You will see several messages during the installation of the DVB-T dongle. First click on the Source tab and make sure that your hybrid tuner is chosen as the primary source. Now click on the Channels tab, choose your region from the drop-down list, and click the magnifying glass to scan for available channels. If subpages are available, then the up/down cursor keys can be used to navigate through these. In the above picture, for example, the page is 100, and the subpage is 08. After the page number is typed, click on the Go to Page button in order to go to that page. The four coloured buttons (red, green, yellow and blue) can be used at hotkeys to go directly to the coloured links which appear at the bottom of the teletext display screen. The action button enables you to choose any page number displayed within the screen. You can then use the up/down arrow keys to navigate within the screen. Once the page you would like to go to is highlighted, press the action button again to go to that page. This means that you can get instant access to the list of programmes available to you. [. . . ] Once the page you would like to go to is highlighted, press the action button again to go to that page. This means that you can get instant access to the list of programmes available to you. This will open up the following screen: You will find a list of channels down the left-hand side. [. . . ]