User manual EMTEC MP4 PLAYER C230

[. . . ] To avoid damage, make sure that you do not drop, smash o r mis-use the device. Make sure that you only use the player where temperature between 0 °C ~ 40 °C. If the product suddenly has no response or turns off : - Turn off the device for 15s - Turn on the device again 2 SAFETY PRECAUTION Warning: C230 is a precision device made of sensitive components. Some safety precautions and guidelines must be followed. Do not place heavy objects on the device. Keep away from harsh environments including humid dusty and smoky areas. Avoid contact with water and other liquid. Do not use water or chemicals to clean the player. [. . . ] Press the hot key ( ) for the first time, Shuffle mode (ON or OFF) can be set as illustrated below: Press the hot key ( illustrated below: ) for the second time, it changes to Repeat mode (One, Off or All) as 10 Press the hot key ( ) for the third time, it changes to the EQ mode (Normal, Pop, Rock, Jazz or Classic) as illustrated below. CONNECTING TO A PC Connect C230 to PC Connect the supplied USB cable to the USB port on player and to an available USB port on your computer. Warning: Please keep it connected until this player is safely removed from your PC after uploading or downloading is completed. Otherwise, the player may be subject to fatal failure or data loss. 11 BUILD MUSIC LIBRARY After turning on the device, it will go through a process of building music library. It is a process of updating and reorganizing the database as illustrated below: FORMAT THE DEVIC E (Formatting is not required unless data corruption has occurred) Windows 2000 For Window ME or 2000, connect the device with PC, right click the removable drive in "My Computer" and select "Format" . In MTP mode For Window XP, it must be done in Windows Media player 10, click the button as the figure below: 12 PD Video Converter specification 1. support: Microsoft Windows 2000 / XP / Vista Download and install the application & required library 1. Go to http://www. pdconverter. org and select th e "download" tab. 13 2. Select "Download PDConverter" and download the latest version of the application. 3. - 4. 1 Click the next step to go to the next step. 14 - 4. 2 Select the installation path and click next. - 4. 3 Click the install to start the installation. 15 - 4. 4 The driver is installed during the installation ( if your O. S. is Windows XP, one warning dialog will appear and please select "Continue Anyway" ) - 4. 5 Click "Finish" button to complete the installation of the application. 16 5. Select "Download Xvid" and download the latest version of the required library. 6. After the installation, go to the "Start-> Programs" and find the "PDConverter" 2. Click the PDConverter to launch the application. 17 Configuration of the application 1. Select the conversion parameters Bit Rate : Frequency : Frame rate : Resolution : 128Kbps 44100 HZ 30 fps 220 : 176 . Select your target location for the output file(s) by clicking the ". . . " (e. g. Make sure the parameters is configurated according to [Configuration of the application] section. 3. Click the small square (with the ". . . " marking) to the right side of the "target Location" panel to choose the destination folder for the converted file. After the encoding, you may find the converted file(s) in the target location. ( Please refer to the section of "General and DRM File Transfer" ) Note: Actual Interface of the software will subject to the changes on software version. Please refer to the latest instructions on http://www. pdconverter. org 18 Windows XP (MTP mode): 1. Double click "My Computer" in Windows, you will find a new drive . Audio Player 2. [. . . ] The primary purpose of MTP is to facilitate communication between devices that connect to a computer or other host, exchange data, and then disconnect for standalone use. A secondary purpose of MTP is to enable command and control of a connected device. This includes remote control of device functionality, monitoring of device-initiated events, and reading and setting of device properties. It doesn't require separate drive installation when It's first connected to PC and it can be used as an external mass storage device using 'drag and drop' method with 'Windows Explorer'. 26 TROUBLE SHOOTING Symptom Possible Solution The device cannot be turned on The battery is exhausted. [. . . ]