User manual ENERMAX MAXREVO EMR1350EWT 80PLUS GOLD

[. . . ] Reproduction in any manner without the written permission of ENERMAX is strictly forbidden. ENVIRONMENT Operation ambient: 0~40oC Operation ambient: 0~50oC o Storage ambient: -40~70 C Storage ambient: -40~70 oC o Operation: to 85% relative humidity, non-condensing at 25 C Storage: to 95% relative humidity, non-condensing at 50 oC OTHERS > 100, 000 hours at 70% of full rated load, 230VAC/50Hz, 25 oC (MIL-HDBK-217F standard) 150 (w) x 86 (h) x 180 (d) mm 2. 3kg (without modular cables) ±50g TUV, GOST, CB, BSMI CE, FCC, KCC MTBF Dimension Weight Safety EMC 2 User’s Manual Dear customer, Thank you for choosing this ENERMAX power supply unit (PSU)!Please read this manual carefully and follow its instructions before installing the PSU. [. . . ] If you cannot easily insert a connector, please check if you are inserting the connector in the right orientation. This might damage power supply and system components, and warranty shall be void. Following graphic illustrates the modular sockets layout and its DC rail distribution. *You must connect 16-pin and 20-pin connectors into respective sockets to enable 24-pin MB and 8-pin CPU connectors. *This product incorporates multiple 12V rails over current protection. If you let many peripherals consume the power on only one 12V rail , it may trigger the over current protection and shut down the system. Please re-direct certain peripheral power cable to other 12V rail to share the current loading to ensure highest stability and safety. 6+2P (8P) PCI Express, in combined mode 8-pin configuration supports latest extreme graphic cards, which require 8-pin PCI-E connector. 6+2P (8P) PCI Express, in split mode / 6P PCI Express 6-pin configuration supports most performance PCI-E graphic cards, which require 6-pin PCI-E connector. 4P Molex # 2 For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. Normally, use either one of power connector to power the driver, BUT NOT BOTH!#2 Some MB might require this connector to share the +12V current from 24-pin Mainboard connector to PCI-E slot. If your system has multiple extreme graphic cards, please plug this connector to MB correspond socket and check the MB’s manual for details.  MODULAR CABLES SUPPLIED Use ONLY genuine ENERMAX modular cables coming with ENERMAX PSU. Third party cables might not be compatible and might cause damage to your PSU and/or system, and use of third party cable shall void PSU warranty. 0 Modular cable for 1 or 2 performance PCI Express graphic cards, which needs 6P or 8P PCI-E connector. EMC018-G : 8P & 4P +12V CPU/RAM power Modular cable to support special heavy-duty workstation/server with more than 4 CPUs and 16 RAMs. eMC019-G: 4 x SATA drives Modular cable for SATA/SAS drives like ODD and HDD. EMC020-G : 4 x 4P Molex (IDE/SCSI) drives & 1 x FDD connector Modular cable for IDE/SCSI/SAS drives and peripheral, plus 1 FDD power connector. 5 EMC021-G: 2 x SATA & 2 x 4P Molex Modular cable for SATA/SAS/IDE/SCSI drives and other peripherals. EMC022 :24P MB & 8P CPU Special note for System Integrators: If your system requires special modular cable configuration or design, please contact an ENERMAX sales representative. Detaching the modular cable from PSU 5-pin / 12-pin connector on modular cable has two hooks to lock with the PSU’s modular sockets. [. . . ] 6+2P (8P) PCI Express, in split mode / 6P PCI Express 6-pin configuration supports most performance PCI-E graphic cards, which require 6-pin PCI-E connector. 4P Molex # 2 For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. #1 Beberapa perangkat sata mempunyai koneksi power sata dan 4p molex power, secara normal, gunakan salah satu dari konektor tersebut, diharapkan TIDAK menggunakan keduanya, silahkan membaca kembali buku petunjuk perangkat sata anda #2 Beberapa motherboard membutuhkan konektor ini untuk mendapatkan daya tambahan untuk 12v selain dari 24-pin mainboard connector ke slot PCI-E, jika sistem anda mempunya graphic card yang lebih dari 1 silahkan memasangkan konektor ini dan membaca kembali buku petunjuk mainboard anda. 0 Modular cable for 1 or 2 performance PCI Express graphic cards, which needs 6P or 8P PCI-E connector. [. . . ]