User manual EPSON ACULASER C9200

[. . . ] User's Guide NPD3657-00 EN EPSON AcuLaser C9200 Series User's Guide Copyright and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] See "Clearing Jammed Paper" on page 183 for instructions on removing the jammed paper. Maintenance Unit Needed Soon This message indicates that the maintenance unit is near the end of its service life. You can continue to print until the Replace Maintenance Unit message appears. To clear this warning message and continue printing, select Clear All Warnings from the control panel's Reset Menu. For instruction about accessing the control panel menus, see "How to access the control panel menus" on page 79. Manual Feed ssss The manual feed mode is specified for the current print job. Make sure the paper size indicated by ssss is loaded, then press the Start/Stop button. Memory Overflow The printer has insufficient memory to execute the current task. Press the Start/Stop button on the control panel to resume printing, or press the + Cancel Job button to cancel the print job. Need Memory The printer has insufficient memory to complete the current print job. To clear this error message, select Clear Warning from the control panel's Reset Menu. See"How to access the control panel menus" on page 79 for instructions. To prevent this problem from recurring, add more memory to your printer as described in "Memory modules" on page 259, or reduce the resolution of the image to be printed. Non-Genuine Toner Cartridge Using the Control Panel 112 EPSON AcuLaser C9200 Series User's Guide The installed toner cartridge is not a genuine Epson product. The printout and remaining service life of each toner cartridge displayed on the control panel may be different from those when using genuine EPSON toner cartridges. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson. Install a genuine Epson product, or Clear All Warnings of the Reset Menu on the control panel to clear the warning message. See "Toner Cartridge" on page 161 for instructions on replacing the toner cartridge. NonGenuine Toner uuuu The installed toner cartridge is not a genuine Epson toner cartridge. The printout and remaining service lives of the toner cartridges displayed on the control panel may be different from those when using genuine EPSON toner cartridges. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson. Optional RAM Error The optional memory module may be corrupted or incorrect. [. . . ] 49. 5 kg (about 109. 1 lb) (Excluding consumables and options) Technical Specifications 255 EPSON AcuLaser C9200 Series User's Guide Electrical 120 V Model L551A Rated voltage Rated frequency Rated current Power consumption During printing Average 110 V-120 V 50 Hz-60 Hz 12. 0 A 581 W (color mode) 543 W (black-and-white mode) MAX During ready mode During sleep mode* * 220-240 V Model L551A 220 V-240 V 50 Hz-60 Hz 8. 0 A 576 W (color mode) 522 W (black-and-white mode) 1390 W 146 W 11 W or below 1340 W 139 W 11 W or below Values represent power consumption while all operations are completely suspended. Power consumption varies depending on operating conditions, and whether a type-B interface card is installed or a USB memory is inserted. Standard and approvals European model: Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC EN 60950-1 EN 55022 Class B EN 55024 EN 61000-3-2 EN 61000-3-3 Interfaces Parallel Interface Use the IEEE 1284-I compliant parallel interface connector. ECP mode/Nibble mode Technical Specifications 256 EPSON AcuLaser C9200 Series User's Guide USB interface USB 2. 0 High Speed mode Note: Only computers equipped with a USB connector and running Windows Vista, Vista x64, XP, XP x64, 2000, Server 2003, or Server 2003 x64, support the USB interface. Your computer must support USB 2. 0 in order to use USB 2. 0 as the interface to connect your computer to the printer. [. . . ]