User manual EPSON DFX-8500

[. . . ] Power switch sprockets* paper supports* * front tractor unit parts Paper bail paper supports** print head ** rear tractor unit parts Paper separator cover No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product. [. . . ] ) The printer saves the overlapping form information in the memory area you selected. When the information is saved, the printer beeps and is ready to print. You have now finished all of the steps for saving information on forms. For continuous forms with labels or overlapping multi-part forms with labels, hold down the Paper Select button and turn on the printer. (The printer beeps once when it saves settings for memory a and twice for memory b. When the check is finished, the printer beeps continuously until you open the printer's top cover. Warning: If you have been using the printer, the print head may be hot; let it cool for a few minutes before touching it. Move the pointer (the point where the two lines intersect) to the label's upper left corner. Use the Micro Feed buttons to move the paper up or down and manually move the print head left or right. Use the Micro Feed buttons to move the paper up or down and manually move the print head left or right. The printer saves the continuous forms with labels information in the memory area you selected. The memory number you selected is displayed and the printer beeps three times, indicating that it is ready to print. To load paper memory settings, simply press the Paper Select button until the desired paper number is displayed. EPSON Status Monitor 2 is a utility that comes with your printer for use with Windows 95. It allows you to monitor your printer's status, alerts you when printer errors occur, and provides troubleshooting instructions when needed. This chapter tells you how to use the Status Monitor to get printer status information and how to set the background monitoring feature to automatically alert you whenever your printer's status changes. when you install the EPSON Status Monitor 2 , the Paper Memory utility is also installed automatically. Note: To monitor a DFX-8500 printer through a network, you must install an optional Type B Ethernet Interface Card (C82357]) in your printer and use the Status Monitor utility that comes with the interface card. See the manual that comes with the interface card for instructions on using the Status Monitor in a network environment. if not , install the printer driver for Windows 95 as described in Chapter 2. Note: If you installed the Status Monitor before the driver, install the printer driver, then install the Status Monitor again. Type A:\SETUP (if you inserted the disk in a drive other than "A", substitute the appropriate letter) and click OK. [. . . ] Near letter quality reduces the print speed and increases the number of dots per character to produce high-resolution characters. Overlapping multi-part forms A kind of continuous paper that provides you with multi-part forms. the page length of the multi-part forms is longer than that of the backing continuous paper. So when extended, one page's multi-part forms overlap the next page's multi-part forms. [. . . ]