User manual EPSON EMP-52

[. . . ] Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. p. 52 , etc. Indicates buttons on the remote control or projector's control panel. Example: "Picture"-"Color Mode" Indicates the port name of the projector. Example: [InputA] " (Menu Name) " [ (Name) ] Meaning of "unit" and "projector" When "unit" or "projector" appears in the text of this User's Guide, they may refer to items which are accessories or optional equipment in addition to the main projector unit itself. Checking the Components When you unpack the projector, make sure that you have all these components. [. . . ] Press on the remote control to cancel the blank function. Check that the power for the connected equipment is turned on. If the "Message" menu command has been set to "On", messages relating to the image signals will be displayed. "Settings" - "Display" - "Message" p. 32 If a composite video or S-Video signal is being inputÅ If projection does not occur when the "Video Signal" menu command is set to "Auto", select the signal format that matches the signal source. "Settings" - "Input Signal" - "Video Signal" p. 33 If the signal source is connected to the [InputA] port If projection does not occur when the "InputA" in the "Input Signal" menu command is set to "Auto", set the signal format that matches the signal that is being projected from the connected equipment. "Settings" - "Input Signal" - "Input A" p. 33 You can also press on the remote control to select the format. p. 15 If the VCR or DVD equipment is connected using a D4 SCART adapter Press to set the signal format to "D4/SCART". p. 15 When still no images appear and the DVD equipment is connected, change the setting at the DVD equipment to RGB output. Are the image signal format settings correct? Have the configuration menu settings been made correctly? Were the projector and computer connected while their power was already turned on?When a computer is connected Try resetting all of the current settings. p. 34 If the connection is made while the power is already turned on, the function (Fn) key that switches the computer's video signal to external output may not work. Turn the power for the computer that is connected to the projector off and then back on again. Moving images are not displayed Is the computer image signal set Set the image signal to output only externally. Computer documentation, under a title such as "External to output simultaneously both output" or "Connecting an external monitor" externally and to the LCD monitor?Only when projecting images from a laptop computer or computer with a built-in LCD screen 37 Troubleshooting Problem Solving The message "Not Supported. " is displayed Are the image signal format settings correct? If a composite video or S-Video is being input If projection does not occur when the "Video Signal" menu command is set to "Auto", select the signal format that matches the signal source. Computer and RGB video signals only Has the correct resolution been selected?Only when projecting computer images Check that all of the cables required for projection are securely connected. The projector has an automatic adjustment function that causes the optimum images to be projected. However, for some types of signal, the correct adjustments may not be obtained even after automatic adjustment is carried out. In such cases, use the "Tracking" and "Sync. " menu commands to make the adjustments. "Image" - "Tracking", "Sync. " p. 29 Set the computer so that the signals that are output are compatible with this projector. "List of Supported Monitor Displays" p. 47 Computer documentation Image is truncated (large) or small Has the "Position" setting been adjusted correctly?Only when projecting computer images Use the "Position" the menu command to make the adjustment. "Image" - "Position" p. 30 If dual display has been activated in the Display Properties of the computer's Control Panel, the projector will only project about half of the image on the computer screen. To display the whole of the image on the computer screen, turn off the dual display setting. Computer video driver documentation 39 Troubleshooting Has the correct aspect selected? been Press to select the aspect that corresponds to the input signal. [. . . ] 12, 47 [S-Video] input port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12, 49 Sync Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Sync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 29 T Test Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]