User manual EPSON EMP-600

[. . . ] The documentation for your EPSON projector is divided into the following three manuals. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes World-Wide Warranty Terms and a Troubleshooting check sheet. â· Quick Reference Guide Contains an overview of the most commonly-used projector functions for easy reference. You should keep this Quick Reference Guide near the projector at all times and refer to it before starting presentations and while using the projector in order to check details of operation. [. . . ] The functions in the Video menu cannot be adjusted while no video signal is being input. â· The functions which appear in the Video menu will change depending on the type of input source being used for the video signal. Functions which are not available in the Video menu for a particular input source cannot be adjusted. Press the button and make the adjustment using the display position adjustment screen which appears. Flickering and fuzziness may also appear when the brightness, contrast , sharpness or keystone settings are adjusted. â· You can obtain the best results if you adjust the tracking first and then adjust the synchronization. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. Normal : For presentation in bright rooms where brightness is emphasized. â· Meeting : Images are modulated using their original tints, with no color enhancement. If Manual is selected, you can select the image resolution for adjustment from a list. Select Reset All to return all menu settings to their default settings. Press the button and make the adjustment using the display position adjustment screen which appears. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. Normal : For presentation in bright rooms where brightness is emphasized. â· Meeting : Images are modulated using their original tints, with no color enhancement. The black & white extension function operates to emphasize the gradation differences (color densities) when projecting images in dark or light environments, in order to make the images easier to see. Press the button, and choose the setting from the video signal format selection sub-menu which appears. â· When set to Auto, the video signal format is set automatically, but if projecting signals in PAL (60 Hz) format, the setting needs to be made manually. Ignored when a menu or help screen is being displayed, even when set to ON. The setting becomes effective from the point where the menu or help screen is closed. [. . . ] 100) *3 Connection is not possible if the equipment does not have a VGA output port. 9 inches Polysilicon TFT active matrix Full-line 12-phase block sequential writing EMP-820/811 : XGA 786, 432 pixels (1024 (W) x 768 (H) dots) x 3 EMP-600 : SVGA 480, 000 pixels (800 (W) x 600 (H) dots) x 3 Remote: 1 Stereo mini jack * The USB connector is not guaranteed to operate correctly with all USB-compatible devices. Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. [. . . ]