User manual EPSON EMP-703

[. . . ] The documentation for your EPSON projector is divided into the following three manuals. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes World-Wide Warranty Terms and a Troubleshooting check sheet. owner's Manual (this manual) This Owner's Manual contains information on installing the projector , basic operation , using the projector menus , troubleshooting and maintenance. Quick Reference Guide Contains an overview of the most commonly-used projector functions for easy reference. [. . . ] You can use the operation panel to control the projector instead of the remote control. However, you can program and access the custom features only using the remote control. If there is no S-video input, the switch toggles between computer and composite video. Scrolls up and down, or right and left when the Help menu is displayed. The power and lamp indicators at the top of the projector tell you its operating status. See Chapter 5, "Troubleshooting, " for what to do if a warning light comes on. Projection lamp is off, and the projector is cooling down for one minute. First, remove the lamp and check to see if it is broken (be careful not injure yourself on broken glass if the lamp is broken). If the problem still persists or the lamp is broken, contact your dealer or nearest address provided at "International Warranty Conditions" in "Safety Instructions/World-Wide Warranty Terms" included in the package. Meaning The projector has turned off automatically because of over heating. After 5 minutes has passed, pull out the power plug once, then insert it again. If the projector overheats, check the following 2 points and make the necessary improvements. Make sure the air intake and exhaust vents are not covered, and that it is not placed up against the wall. When the power plug is reinserted, the projector will recover to the normal state, so press the power button and turn on the power again. If the projector overheats again even when the above measures have been taken, and when an error is displayed in the indicator when the power is turned on again, discontinue use, Pull the power plug out of the receptacle then request repairs by the retail shop where you purchased it, or by the service office at the nearest address provided at "International Warranty Conditions" in "Safety Instructions/World-Wide Warranty Terms" included in the package. Pull the power plug out of the receptacle then request repairs by the retail shop where you purchased it, or by the service office at the nearest address provided at "International Warranty Conditions" in "Safety Instructions/World-Wide Warranty Terms" included in the package. The Video menu controls the look and quality of the projected image, whether the image source is a computer or video. The User's Logo menu lets you select special features such as background color or a custom logo. The About menu provides information about H/ V(Horizontal/Vertical) frequency, and lamp hours etc. Press the top or bottom of the Enter button to scroll through the menu choices. Note: The options available in some submenus vary, depending on whether the current image source is the computer or a video source. Press the top or bottom of the Enter button to scroll through the menu choices. [. . . ] A 625-line TV system used in France, Eastern Europe, Russia and parts of Africa. According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2. [. . . ]