User manual EPSON EMP-810

[. . . ] The documentation for your EPSON projector is divided into the following three manuals. Safety Instructions/World-Wide Warranty Terms This manual contains information on using the projector safely, and also includes World-Wide Warranty Terms and a Troubleshooting check sheet. ⷠQuick Reference Guide Contains an overview of the most commonly-used projector functions for easy reference. You should keep this Quick Reference Guide near the projector at all times and refer to it before starting presentations and while using the projector in order to check details of operation. [. . . ] If you press the [P in P] button once more, the sub-screen will disappear. If you change the position of the sub-screen, the sub-screen will appear in the last position which was set next time the P in P function is used. ⷠThe E-Zoom function can be used at the same time that the P in P function is being used. ⷠIf the audio input connector for the main screen and the sub-screen have already been set using the Audio Input command in the Audio menu, you can use the Effect buttons to switch between the sound for the two screens. effect [1] button: Main screen audio Effect [2] button: Sub-screen audio · If the P in P function is used keystone correction amount is near the limit, a message may appear on the screen and it may not be possible to use the P in P function at this time. The setting menus can be used to carry out a variety of settings and adjustments. The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus. The functions in the Video menu cannot be adjusted while no video signal is being input. ⷠThe functions which appear in the Video menu will change depending on the type of input source being used for the video signal. Functions which are not available in the Video menu for a particular input source cannot be adjusted. Press the button and make the adjustment using the display position adjustment screen which appears. Flickering and fuzziness may also appear when the brightness, contrast , sharpness or keystone settings are adjusted. ⷠYou can obtain the best results if you adjust the tracking first and then adjust the synchronization. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. Normal : For presentation in bright rooms where brightness is emphasized. ⷠMeeting : Images are modulated using their original tints, with no color enhancement. If Manual is selected, you can select the image resolution for adjustment from a list. Select Reset All to return all menu settings to their default settings. Press the button and make the adjustment using the display position adjustment screen which appears. The settings can be saved separately for each type of source (computer or video source). You can select from six different quality settings depending on the surroundings. [. . . ] If command processing terminates with an error, an error message is output and then the ":" code is sent. Function Signal wire ground Transmit data Receive data Data set ready Data terminal ready *1 Virtual (window) display *2 The EMP-600 is not compatible with UXGA. The EMP-810/800 can only handle UXGA display resolutions when the optional computer cable is being used. 100) *3 Connection is not possible if the equipment does not have a VGA output port. [. . . ]