User manual EPSON LQ-100 ESCP MANUAL

[. . . ] Please set up the connection according to the procedures shown below. Setting Up a Shared Printer Server Settings Please refer to the manual for the appropriate printer. [. . . ] On the Windows Start menu, open the Printers or Printers and Faxes folder. · Windows Vista Click Start, click Control Panel, and then click Printers. · Windows NT4. 0/2000 Click Start, click Settings, and then click Printers. · Windows XP Professional Click Start and then click Printers and Faxes. Click Network, enter the following information for Specify the network path to the printer, and then click OK. \\Name of computer connected to the target printer\name of shared printer Note: If you do not know the path to the network printer, click Browse to search for the appropriate printer. 6 5. Check that the port name you added is selected for Print to the following port, and then click OK. Important: When using the same operating systems or architectures for servers and clients, the connection can be set up according to the procedures described in the manual. [Printer Software] ­ [Setting Up Your Printer on a Network] ­ [Setting the clients] 7 Problems and Solutions Network problems A communication error occurs Cause What to do Are multiple users are logged into a single computer at the same time? On a Windows XP (64 bit)/Vista (32 bit/64 bit) system with multiple users, a communication error may occur when switching to a new user and starting a new print job while the previous user is still printing. [. . . ] Make sure that the print job for the first user is complete and that user is logged off before switching to a new user and starting a new print job. You are unable to monitor the shared printer using EPSON Status Monitor 3 Cause What to do Are you using a Windows XP (64-bit)/Vista (32-bit/64-bit) print server with a client set up for an operating system (Windows 95/98/Me/NT4. 0/2000) which is older than Windows XP (32-bit)? When using an operating environment with this combination, the error window for EPSON Status Monitor 3 may not pop up on the client when an error occurs. [. . . ]