User manual EPSON LQ-1060 ESCP MANUAL

[. . . ] Tear Off/Bin lights (LQ-680) q f f when continuous paper is in the tear-off position. Q Feeds continuous paper backward from the tear-off position to the top-of-form position. Tear Off/Special Paper lights (LQ-680Pro) q f f when continuous paper is in the tear-off position. *Micro Adjust mode When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. [. . . ] Click Options (or a similar button) to view the Advanced Document Properties dialog box, which includes the Graphics Resolution, Color, and Optimizations printer driver settings. To access the printer driver from the Control Panel, follow these steps: 1. Make sure your printer is highlighted, then click Printer and select Properties. You see the Document Properties dialog box, which includes the Form and Orientation printer driver settings. Click Options to open the Advanced Document Properties dialog box, which contains the Graphics Resolution, Color, and Optimizations printer driver settings. You can change printer driver settings in the Document Properties dialog box and the Advanced Document Properties dialog box. When you finish making your printer driver settings, click OK to apply the settings, or click Cancel to cancel your changes. Once you've checked your printer driver settings and changed them if necessary, you are ready to print. Settings Paper size Explanations Select the size of the paper you want to use. If you don't see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, click Custom or User Defined Size and enter the paper size in the dialog box that appears. The following settings are available: select Notification Displays the error item check box ON/OFF status. Error notification for a shared printer can be received when this check box is turned on. When this check box is turned on, a shared printer can be monitored by other PCs. When you access EPSON Status Monitor 3 as described above, the following printer status window appears. see "Built-in fonts:" on page C-4 for information of fonts you can select. You can also change the pitch by turning the condensed mode on or off. You can select the font and pitch using the buttons on the printer's control panel as described below. Note: Settings you make in your application programs usually override settings you make from the printer's control panel. Follow these steps to select a built-in font or pitch using the buttons on the printer's control panel: 1. To select a font, press the Font button until the three Font lights indicate the font you want with a pattern shown on the control panel. note: The Font button cannot directly select OCR-B , Orator , OratorS , Script-C , Roman-T , or Sans Serif H. [. . . ] Value settings or settings that take effect when a device (such as a printer) is turned on, reset, or initialized. A halftoning method in which dots are printed in a predetermined pattern to simulate a shade or tone. Dithering works best for images with solid colors, such as charts and graphs. A method of printing in which each letter or symbol is formed by a pattern (matrix) of individual dots. [. . . ]