User manual EPSON LQ-2500+ ESCP MANUAL

[. . . ] Separate the ribbon guide from the cartridge by pulling the ribbon guide forward. 9. 10. Attach the paper guide. c Caution: Do not tear off the clear film on the ribbon guide. Doing so may cause paper jams or printer malfunctions. Connecting the Printer to Your Computer Connecting the printer Make sure both the printer and computer are turned off, then connect the interface into the printer and computer. Plugging in the Printer Make sure the printer is turned off, then plug the power cord into a properly grounded electrical outlet. Installing the Printer Software For Windows Me, XP, or 2000 users Note: Installing the printer software for Windows XP or 2000 may require administrator privileges. [. . . ] Click Browse to select appropriate path for the printer driver, then click OK and follow the instructions on the screen. Note: If you are using Windows NT 4. 0, insert your Windows CD-ROM when prompted on the screen. When prompted, insert the Printer Driver Software CD-ROM, then click Browse to select appropriate path. Note: If you receive a message saying the drive is not accessible, click Cancel and try again. You are ready to use. For Windows 98, 95, or NT 4. 0 users Note: Installing the printer software for Windows NT 4. 0 may require administrator privileges. The examples in the following section are from the Windows 98 operating system. They may vary in appearance from what actually appears on your screen; however, the instructions are the same. Make sure that the printer is turned off, then insert the printer software CD-ROM into the CD-ROM drive. If paper from another paper source is currently in the paper path, press the Load/Eject button to eject the paper; then move the paper release lever to the desired position. o = off, n = on, f = flashing Replacing the Ribbon Cartridge ··· = short series of beeps (three beeps) w 1. 4. Warning: If you have just used the printer, the printer may be hot; let it cool for a few minutes before touching it. When printing becomes faint, you need to replace the ribbon cartridge. Remove the ribbon cartridge by pulling the ribbon guide and then the body of the cartridge forward. Follow steps 5 - 10 in the Assembling the Printer section on the front of this Setup Guide. Note: EPSON recommends the use of genuine EPSON ribbon cartridges (S015290). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers. [. . . ] EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. [. . . ]