User manual EPSON STYLUS COLOR 400

[. . . ] Provides you with all the information you need to use your EPSON Stylus COLOR 400 and consumable products, from setting up to troubleshooting. Provides you with detailed information and instructions on the Windows printer software that controls your printer. Provides you with additional information on using your printer and printing with colors. How To displays a step-by-step guide for using your printer, information about printer maintenance, and instructions on replacing consumable products. [. . . ] Note: If the ink runs out, you cannot continue printing until you replace it even though the other ink cartridge still contains ink. Caution: Once you remove an ink cartridge, it becomes unusable and cannot be reinstalled even if ink remains. Determine which cartridge color needs to be replaced as indicated by the black or ink out light. Note: If you need to replace an ink cartridge when the lights are off, see page 6-28. Make sure the printer is paused and the output tray at the front of the printer is lowered; then open the printer cover. Hold down the the print head moves left slightly to the cartridge replacement position, and the power light flashes when the print head is in position. Note: u The printer automatically moves the print head back to its home (far right) position after about 60 seconds if you have not started the replacement procedure. If you hold down the eaning button when both and ink out lights are off, the printer starts cleaning the print head. When you do, the cartridge will rise partly out of the cartridge holder. Warning: If ink gets on your hands, wash them thoroughly with soap and water. Caution: Leave the old cartridge installed in the printer until you are ready to replace it with a new one. Next, remove only the yellow tape seal from the cartridge as shown below. Leaving the tape on when you install the cartridge will permanently damage it. Do not remove the whole tape seal (especially the white portion) from the top of the cartridge. Do not remove the tape seal from the bottom of the cartridge; otherwise, ink will leak. Lower the ink cartridge into the cartridge holder with the label on the cartridge face up and the arrow on the cartridge pointing to the rear of the printer. Caution: The power light continues to flash while the printer performs the ink charging operation. Note: cleaning button, the printer Even if you do not press the moves the print head and begins the ink charging process about 60 seconds after you replace the ink cartridge. To keep your printer operating at its best, you should clean it thoroughly several times a year. Make sure the printer is turned off and all the control panel lights are off. If the outer case or the inside of the sheet feeder is dirty, clean it with a soft, clean cloth dampened with mild detergent. If the inside of the printer accidentally gets soiled with ink, wipe it off with a damp cloth. [. . . ] This halftoning setting smoothes out edges by randomly placing dots of varying colors. A command language that gives you control of your printer from your computer. This printer driver setting feature automatically makes your printed images sharper and clearer. Grayscale is used to represent colors when printing with black ink only. [. . . ]