User manual EPSON STYLUS PHOTO 700

[. . . ] Provides you with all the information you need to use your EPSON STYLUS PHOTO 700, and their consumable products, from setting up to troubleshooting. Provides you with detailed information and instructions on the printer software that controls your printer (online help will be automatically installed when you install the printer software). 1 users with additional information on using your printer and printing with colors. How To displays a step-by-step guide for using your printer, information about printer maintenance, and instructions on replacing consumable products. [. . . ] To set your monitor profile, access the ColorSync System Profile utility through the Control Panel and click the Set Profile button. Select your monitor from the list of monitors that appears, and then click Select. Profile Matches the colors in your output with the colors displayed on your monitor. This software provides one profile, EPSON Standard, which is custom-designed to work with your printer. when this option is selected , the printer software uses the profile provided by EPSON. Rendering Intent Transfers the color information using the profile you have chosen from the Profile list. Perceptual The best option for reproducing photographs and printouts that are not suited for the other options. The best option when precise matching of colors is most important, for example, when printing a company logo. Colorimetric attempts to reproduce colors the way the eye distinguishes them. Keep in mind that Colorimetric, or any other color matching method, may not always reproduce colors perfectly, due to differences in the way scanners, printers, and other devices process color data. Your settings will be applied and you will return to the Print dialog box. To return to the Print dialog box without applying your settings, click Cancel. You can select your saved group of settings from the settings list in the Print dialog box. Note: G You cannot use a predefined setting name for your custom settings. To select your settings, click Advanced in the Print dialog box, then click in the settings list beside the More Settings button and select your setting. If you change the Media Type or Ink option when one of your customized settings is selected in the settings list, the selection shown in the list returns to Custom Settings. The customized setting that was previously selected is not affected by this change. To change the paper size, choose Page Setup from the File menu of your application. The following dialog box appears: You can select any of the following predefined paper sizes. If you do not see your paper size in this list, see the next page for instructions on defining a custom paper size. A4 B5 A5 Letter Legal Executive Half Letter Envelope #10 Envelope C6 Envelope DL A6 Index card Index card 5 × 8 in Index card 8 × 10 in EPSON Photo Paper 4 × 6 in Panoramic 210 × 594 mm Note: Always load paper into the sheet feeder short edge first. Select this setting when you want to rotate your document and minimize the blank area at the bottom of your document. [. . . ] It receives the jobs and then distributes them to the assigned printer. When your printer is busy printing a print job, any additional print jobs sent to the printer are placed in a waiting line, or print queue, until they can be printed. The print queue may be on a network print server, or on your local computer, depending on the computer to which the printer is connected. To return a printer to its defaults either by sending a command, an INIT signal, or by turning the printer off and then back on. [. . . ]