User manual EPSON TM-U220

[. . . ] No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. [. . . ] Do not connect a telephone line to the drawer kick out connector; otherwise, the printer and the telephone line may be damaged. Do not open the cover during printing or when the autocutter is being operated. Do not place food or beverages such as coffee on the case of the printer. When using the printer, be sure that the printer is installed horizontally. If you are using a Type B or D printer, you can hang it on a wall, using the optional hanging bracket set, WH-10. Be sure to use the correct power supply unit as listed below: TM-U220 alphanumeric model (types A, B, and D) TM-U220 multilingual* model (types A, B, and D) "AC adapter, C" (packed with the alphanumeric "PS-180" (packed with the multilingual* model) model) or "PS-180" (option) Note: The "AC adapter, C, " which is packed with the alphanumeric model, cannot be used with the multilingual* model. If the "AC adapter, C, " packed with the alphanumeric model, is connected to the multilingual* model by mistake, the printer might not operate correctly. For example, printing might stop before all the lines are printed or the printer might print the same line repeatedly. *Multilingual means the printer model that can print any one of the following: Japanese Kanji, Simplified Chinese, Traditional Chinese, Thai characters, or Korean characters. This manual provides information to operators of the TM-U220 to describe basic operations to enable safe and correct use of the printer. Because this manual covers three types of the TM-U220, some of the illustrations may be slightly different from your printer; however, the instructions cover all types, except as noted. When this product is used for applications requiring high reliability/ safety such as transportation devices related to aviation, rail, marine, automotive etc. ; disaster prevention devices; various safety devices etc; or functional/precision devices etc, you should use this product only after giving consideration to including fail-safes and redundancies into your design to maintain safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care etc, please make your own judgment on this product's suitability after a full evaluation. The following items are included for the standard specification printer. Printer Roll paper Exclusive ribbon cassette [ERC-38(B/R)] AC adapter (May not be included with the printer. ERROR Lights when the printer is offline (when the roll paper is at the end, or the roll paper cover is open). Note: Paper cannot be fed by using this button when a paper out is detected. [. . . ] If you have a Type A printer, remove the take-up spool and open the unit by using the unit open lever, as shown in illustration I. This product is in compliance with the EPSON ecology label requirements. TM-U220 alfanumerieke model (types A, B en D) "AC adapter, C" (meegeleverd met het alfanumerieke model) of "PS-180" (optie) TM-U220 veeltalige* model (types A, B en D) "PS-180" (meegeleverd met het veeltalige* model) Als de "AC adapter, C", meegeleverd met het alfanumerieke model, per ongeluk aangesloten wordt op het veeltalige* model zal de printer mogelijk niet juist functioneren. [. . . ]