User manual FLAM MT PLUS 57 DIMENSIONS

[. . . ] 5" x 14" [216 x 356 mm] (Non-standard sizes must be defined in driver before printing: see your on-line User's Guide. Feed stack = about 3/8-inch (1 cm) high Single-sided printing: load face up, top edge into the printer. Double-sided printing: load face down with top edge away from the printer. [. . . ] The setting is engaged and the second line of the display stops blinking. Envelopes: If you are setting the MP Tray for envelopes, press ON LINE and you are done. Heavy paper / labels: If you are setting the MP Tray for heavy paper or labels, keep going. Press + repeatedly until your choice of CARD STOCK or LABELS appears on the second line of the display. Press Press + repeatedly until the second line of the display shows the Value (for envelopes, select COM-10 ENVELOPE) you wish to use. The setting is engaged and the second line of the display stops blinking. Provides straight-through, curl-free print path for transparencies, envelopes, labels and heavy paper. Sheets exit face up (for multi-page documents, select reverse order printing in your application Print dialog box). Memory overflow: press ON LINE to recover and place the printer back on line. Press + to enter the Menu mode or to go to the next Category, Item or Value in the Menu. Once you have changed the setting to a new Value, press ENTER to engage the Value. Push the XXX Toner lock lever toward the back of the printer as far as it will go. Note If you have changed the LOW TONER setting to STOP, the ATTENTION light will blink and you must either replace the toner cartridge immediately or press the ON LINE button to continue printing. Install additional memory in the printer (see your on-line User's Guide for more information). The Job Accounting software has detected a print job from a user who is either · not authorized to print or · Trying to print a color job and only authorized to print black and white jobs. The user should contact the System Administrator to see if their authorization can be changed. [. . . ] The Job Accounting software has detected a print job from a user who is either · not authorized to print or · Trying to print a color job and only authorized to print black and white jobs. The user should contact the System Administrator to see if their authorization can be changed. Visit our web site 24 hours a day, 7 days a week: COM 24 hours a day, 7 days a week. [. . . ]