User manual FLAM THEATER MT 68-75F DIMENSIONS

[. . . ] When you are prompted to select the manufacturer and printer model, click Have Disk, then browse to the appropriate CD directory and double click the inf file: · Windows XP \Drivers\WinXP\English\Oemprint. inf · Windows 2000 \Drivers\Win2k\English\Oemprint. inf · Windows 98 and Windows Me \Drivers\Win98_Me\English\Oemsetup. inf · Windows 95 \Drivers\Win95\English\Oemsetup. inf · Windows NT 4. 0 \Drivers\NT40\English\Printer. inf 6. The first line prints showing the factory default emulation: PrinterControl Emulation Mode IBM Front Panel Operations 5. [. . . ] Press PITCH and MODE together to save your settings and exit the printer menu. Note: If your Non-Windows system requires you to select a compatible printer driver in your software, see the Online User's Guide for information to do this. LED Power Select Alarm Indicates that printer is plugged in and turned on. Indicates that paper is low or out, or that there is an internal printer problem. Indicates which print mode is engaged. Adjusting the Head Gap The head gap is the distance between the print head and the platen roller. If the menu is set to the wrong emulation, you will see strange characters, incorrect fonts, etc. Your printer emulates the following printers: IBM (2480)--factory setting; Epson FX (ESC/P); FLAM Microline Note: If you are replacing a Microline ML 184 printer, set the printer menu to match the emulation being used for the existing printer. To change the printer emulation in the printer menu: To adjust the print head gap, move the colored lever located to the left of the ribbon cartridge (a), to the correct position for the type of stationary being used, as detailed below: Paper Type Weight Lever Position 1, 2 2-3 3 3 Mode Single part paper 14 - 20 lb (52 - 75 gm) Form Two part Three part Four part 9 - 11 lb. (35 - 40 gm) with a maximum thickness of 0. 28 mm Oki Data Americas, Inc. Laurel, NJ 08054 http://www. okidata. com 1-800-FLAM-DATA (1-800-654-3282) Copyright 2004 by Oki Data Americas, Inc. FLAM and Oki Data are registered trademarks of Oki Electric Industry Company, Ltd. [. . . ] Laurel, NJ 08054 http://www. okidata. com 1-800-FLAM-DATA (1-800-654-3282) Copyright 2004 by Oki Data Americas, Inc. FLAM and Oki Data are registered trademarks of Oki Electric Industry Company, Ltd. [. . . ]