User manual FRIGIDAIRE FTF2140FE OPERATION MANUAL

[. . . ] ⷠIf the water temperature combination is not appropriate for that cycle, the status lights will blink and the signal will beep 3 times. To change the final spin speed, press SPIN until the indicator for the desired selection is lighted. The indicator light will stop blinking when the option has been selected. ⷠAdjustments to the cycle will be remembered each time that cycle is selected in the future · see "Washer Settings Chart" chart for factory settings. [. . . ] For best results, select a detergent that contains enzymes and the hottest wash water safe for the load. Add a detergant booster, color safe bleach or odor eliminator with the detergent if needed. Fabric softeners reduce wicking and are not recommended for garments made to pull moisture away from the body. Turn the TEMP knob and press SPIN until the desired wash and rinse water temperatures and final spin speed are selected. If the water temperature combination is not appropriate for that cycle, the status lights will blink and the signal will beep 3 times. Settings cannot be changed after the cycle starts unless you pause the program first. To select Heavy Soil/Stain, Extra Spin, Extra Rinse or Cycle Signal, press OPTIONS until the light indicates the desired option. To provide the best care for your laundry items, all options are not available with every cycle. Use this option to add approximately 2 minutes of wash time for very soiled or stained loads. Select the wash and rinse water temperatures appropriate for each load. Use this option when additional rinsing is desired to remove excess dirt and detergent. it is recommended for heavily soiled loads or if household members have sensitive skin. Extra Rinse occurs before the final rinse when the liquid fabric softner is dispensed. This cycle provides 10 minutes of gentle reversing tumble wash action for knits and delicates, followed by 3 rinses and a final spin. Use this option to add several additional minutes to the final spin at the selected speed. The suitable final spin speed for each cycle will automatically be displayed. For example, High Speed in the Normal cycle is much faster than High Speed in the Handwash cycle. To change the final spin speed, press SPIN until the indicator for the desired selection is lighted. If a spin speed is not recommended for a cycle, it will not be displayed. ⷠIncreasing spin speed will extract more water and decrease drying time. [. . . ] The washer automatically adjusts the water level to the type and size of wash load. To avoid having someone accidentally start or stop the washer, press OPTIONS and Select at the same time and hold for about 10 seconds until the Control (Control Lock) lights up. Use the Drain/Spin cycle as a follow-up to a No Spin selection or anytime you want to drain water from the washer and spin out the load. The following will be displayed during the cycle: · Select Rinse Spin for loads that need a cold water rinse or to add fabric softener that may have been omitted in a regular cycle. [. . . ]