User manual GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII. We hope that this GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII user guide will be useful to you.
Manual abstract: user guide GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII
Detailed instructions for use are in the User's Guide.
[. . . ] Pressing the BACK softkey during code selection reverts to the MODE Selection softkeys (Figure 5. 1. 2). Pressing the BACK softkey during Mode Selection reverts to the Top-level softkeys (Figure 5. 1. 1).
NOTE: After 45 seconds of transponder softkey inactivity, the system reverts back to the Top-level softkeys (Figure 5. 1. 1).
TRANSPONDER SOFTKEYS
The transponder function spans three levels of softkeys; the Top-level, the Mode Selection and the Code Selection softkeys. When the Top-level XPDR softkey is pressed, the following softkeys appear in the softkey bar (Figure 5. 1. 2): STBY, ON, ALT, VFR, CODE, IDENT, BACK.
TRANSPONDER STATUS BAR
The Transponder Status bar is located to the left of the System Time box and contains, a four-digit code field, a mode field and a reply status indicator. [. . . ] In all other modes, these fields appear in green.
Transponder Status Bar
Figure 5. 1. 1 Top-level Softkeys
Pressing XPDR displays the Mode Selection softkeys
Pressing BACK displays the Toplevel softkeys
Figure 5. 1. 2 Mode Selection Softkeys
Pressing CODE displays the Code Selection softkeys
Pressing BACK displays the Mode Selection softkeys
Figure 5. 1. 3 Code Selection Softkeys
190-00382-00 Rev. D
Garmin G1000 Transponder Pilot's Guide
5-1
TRANSPONDER DESCRIPTION
MODE S FEATURES
The GTX 33 transponder is equipped with selective addressing or Mode Select (Mode S), capability. Mode S functions include the following features: · Level-2 reply data link capability (used to exchange information between aircraft and various ATC facilities) · Surveillance identifier capability · Flight ID reporting · Altitude reporting · Airborne status determination · Transponder capability reporting · Mode S Enhanced Surveillance (EHS) requirements · Acquisition squitter Flight ID Reporting The G1000 transponder reports aircraft identification as either the aircraft registration or a FLT ID (Flight Identification). The system is configured for either option by an authorized Garmin service center. If configured for Flight ID entry, the pilot must enter the appropriate flight ID on the PFD. After the correct Flight ID is entered, the aircraft identification reported in response to ATC radar interrogations is properly correlated with the associated call sign for voice communication. When a Flight ID contains a space, the system automatically removes it upon completion of Flight ID entry. In this configuration, the transponder then reports the aircraft registration number to ATC.
Acquisition Squitter Acquisition squitter, or short squitter, is the transponder 24-bit identification address. The transmission is sent periodically, regardless of the presence of interrogations. If Altitude mode is selected, a green ALT indication is displayed in the mode field of the Transponder Status bar, and all transponder replies requesting altitude information are provided with pressure altitude information.
CODE SELECTION
Entering a Code
A total of 4, 096 discrete identification codes can be selected with the Code Selection softkeys. Press the XPDR softkey to display the transponder Mode Selection softkeys. Press the CODE softkey to display the transponder Code Selection softkeys, for digit entry. When entering the code, the next key in sequence must be pressed within 10 seconds, or the entry is cancelled and restored to the previous code. Five seconds after the fourth digit has been entered, the transponder code becomes active.
Figure 5. 2. 4 Altitude Mode
3.
Reply Status
When the transponder sends replies to interrogations, an R indication appears momentarily in the reply status field of the Transponder Status bar.
Figure 5. 2. 5 Reply Indication
Figure 5. 2. 6 Entering a Code
NOTE: When entering a code, press the BKSP (backspace) softkey to back up and change code digits.
5-4
Garmin G1000 Transponder Pilot's Guide
190-00382-00 Rev. D
OPERATION
VFR Code
The VFR code can be entered either manually, each digit at a time, or by pressing the XPDR softkey, then the VFR softkey. When the VFR softkey is pressed, the preprogrammed VFR code is automatically displayed in the code field of the Transponder Status bar. Pressing the VFR softkey again restores the previous identification code.
NOTE: The pre-programmed VFR code is set at the factory to 1200.
IDENT FUNCTION
Pressing the IDENT softkey sends an ID indication to Air Traffic Control (ATC). The ID return distinguishes your transponder from all others on the air traffic controller's radar screen. [. . . ] The ID return distinguishes your transponder from all others on the air traffic controller's radar screen. When the IDENT softkey is pressed, a green IDENT indication is displayed in the mode field of the Transponder Status bar for a duration of 18 seconds.
Important Codes
Following is a list of important codes: · 1200 VFR code in the U. S. · 7000 VFR code commonly used in Europe (refer to ICAO standards). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN G1000 CESSNANAVIII COCKPIT REFERENCE GUIDE ADDENDUM CESSNANAVIII will begin.