User manual GEMINI VH-110

[. . . ] No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products. It is recommended that all maintenance and service on the product should be carried out by Gemini Sound Products or it's authorized agents. Gemini Sound Products cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorized personnel. [. . . ] Make an effort to keep the unit away from dusty, dirty environments, and cover the unit when it is not in use. When moving this equipment, it should be placed in its original carton and packaging. High sensitivity cardiod capsule for professional use Special noise absorption parts inside the barrels eliminating switch shock and handling noise Frequency with quartz locked control Gemini wireless systems are the type accepted under FCC rules parts 74 and 15. Licensing of Gemini equipment is the user's responsibility and licensability depends on the user's classification and application. Do not strike the microphone head front with fist or fingers, and do not blow strongly into the microphone head front. Do not use the microphone in areas of high humidity and/or high temperature as this could lead to damage of the microphone. The VH-110 true diversity VH Series wireless system is a high quality audio product that has built in noise reduction and utilizes the true diversity reception technique. True diversity receivers contain two completely independent receivers tuned to the same frequency within a single chasis. An internal processor compares the signal strengths at the output of each receiver and determines which receiver has the clearest and strongest signal, and then that signal is than directed to audio output. This is an automatic function that can be monitored by watching the A-B diversity indicators on the front panel of the receiver. Four different models are available and all operate on a VHF high band frequency between 174. THE MODELS AVAILABLE ARE: VH-110M - which comes equipped with a hand held microphone transmitter. VH-110L - which comes equipped with a belt pack and lavalier transmitter. VH-110H - which comes equipped with a belt pack and a headset transmitter. Insert a 9V battery into the battery holder according to the polarity indication marked on the battery housing. The BATT indicator should flash once briefly as you turn on the mic indicating that the mic has sufficient power. If the BATT stays on, it indicates that the battery has insufficient power and should be changed. If the BATT does not light at all and the mic does not work, it indicates that the battery is dead , and you should change the battery. [. . . ] The LOW BATT indicator should flash once as the switch passes MUTE indicating that the transmitter has sufficient power. If the LOW BATT stays on, it indicates that the battery has insufficient power and should be changed. If the LOW BATT does not light at all, it indicates that the battery is either dead or not positioned correctly, and you should correct the positioning or change the battery. [. . . ]