User manual GEMINI XTR-400

[. . . ] Disconnect unit from the AC power source before making any connections. SPEAKER OUTPUTS (3): The speaker output connectors are SpeakonTM connectors that will accept cables with SpeakonTM connectors. (These cables must be purchased separately) The subwoofer is already connected internally, so you don't have to worry about connecting it to the amplifier. Satellite speakers are uniquely designed for placement on stands or for use as floor monitors, and protected by full front metal grill and metal corners. [. . . ] You can adjust the level of each satellite speaker using it's channel's SENSITIVITY/VOLUME CONTROL (10). There are two parallel input connectors (one female XLR and one 1/4" jack) per channel. 1/4" PHONO INPUT JACKS: 1/4" PHONO INPUT JACKS (2) accept a balanced as well as an unbalanced line. It will always maintain a perfect balance to give you incredible sound quality!SIGNAL GROUND LIFT SWITCH: SIGNAL GROUND LIFT SWITCH (7) is used to lift the balanced input connectors' ground/shield from the amplifier's ground. When the signal ground lifted, the sound source disconnects from the amplifier's ground preventing ground loops which can generate hum and noise. Depending on how your sound system is hooked up, sometimes applying the ground will create a quieter signal path. Sometimes lifting the ground can eliminate ground loops and that annoying hum to give you quieter and cleaner overall sound. With the power amp ON, listen to the system in idle mode (no music or signal) with the ground ON. Now lift the ground by moving the SIGNAL GROUND LIFT SWITCH (7) to the right. Turn the power back ON and listen to determine which position makes the overall sound quieter with the least amount of noise and hum. There are various ways to set up this system: 15" woofer Features: Efficient band-pass cabinet design Large metal handles Metal protection corners Four 2" wheels Amplifier assembly on the back 35mm standmount cap on top Black carpet finish Rubber feet Dimensions:. 10" woofer 6" dual piezo horn Features: Trapezoidal cabinet Full front protective metal grill Metal protection corners 35 mm standmount cup on the bottom Black carpet finish Rubber feet Neutrik Speakon connector Dimensions:. The ideal location for your subwoofer is close to a wall or in a corner. Your 2 satellite speakers can be placed up on stands on each side (stands must be purchased separately). Using the high-hat hardware and connecting pole (which can be purchased separately), place the pole in the high-hat socket on the subwoofer, and a satellite speaker on top of the pole. The 2 remaining satellite speakers may be used as either floor monitors, or placed on stands elsewhere in the room giving you a louder and fuller sound. Each speaker system in this setup must be used in MONO mode (see Mono section). [. . . ] 10" Woofer 6" dual piezo horn Dispositifs: Coffret trapézoïdal Full front protective metal grill Coins de protection en métal 35 mm standmount cup on the bottom Finition noire de tapis Pieds en caoutchouc Connecteur de Neutrik Speakon Dimensions:. In the USA: If you experience problems with this unit, call 1-732-738-9003 for Gemini Customer Service. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. [. . . ]