User manual HARPER I CLEAN 100

[. . . ] CONTENTS Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8 photos and Features of products Operating Principle operation details Exploded Views of the Production Main Technical Data Dismantling Procedure Brief introduction of installation Fault Analysis of the Product Available Chapter 1 photos and Features of products Features of outlook and construction ASW-H07B4/HSAR ASW-07B4/HSAR ASW-H09A4/HSAR ASW-09A 4/HSAR Deep × width ×high 165×802×262 ASW-H07B4/HSR ASW-07B4/HSR ASW-H09A 4/HSR ASW-09A 4/HSR Deep × width ×high 165×802×262 Deep × width ×high 260×760×540 All types All types Operation interface Inner operation interface of Type HSAR Inner operation interface of Type HSR · Emergency operation button of indoor types: Compulsory button 1) When the air-conditioner works with the absence of remote control, it will stop working by pressing the compulsory button and it will resume working by pressing the compulsory button once again. 2) When remote control is useless, you can adopt the compulsory operation by which the air conditioner will go into automatic operation mode. Clean breath efficient biological antibacterial filter gauze made from green plant elite refined by using international leading technology, with the function of filtering and suppressing bacteria, and able to absorb and kill various pathogens and harmful gases efficiently for a long period, prevent secondary pollution caused due to microorganism spreading, and ensure the health of your family 6. Cooling Operating Principle After the power supply is switched on, the machine is set to COOL mode. [. . . ] You can select fan speed from “Power”, “High”, “Low”, and “Mute”. (4)Number display: which displays the setting temperature, in the circulation operation mode, the temperature number does not display. (5)Timer ON/OFF display: which displays the timer states, “the timer ON” and “the timer OFF” do not set at the same time. When the mode operates, the relevant items display on the remote control. Application Fix batteries (1) Slide open the cover according the direction indicated by arrowhead. Put into two AAA new batteries, position the batteries to right electric poles (+&-). Make sure to connect the wire to independent power source socket before you use the remote control. Automatic operation mode (1) Press the MODE button, select the automatic operation mode. (2) Press the TEMP/TIME button, set the temperature, temperature can be set at 1 oC difference range from 16-32 oC. (3) Press the WIND button, you can select fan speed from “Power”, “High”, “Low”, “Mute”. (4) Press the ON/OFF button, the operation indicator is on, the air-conditioner starts to operate in the Automatic mode. Cooling/heating operation mode (cold wind type has no heating operating) (1) Press the MODE button, select the Cooling operation mode. (2) Press the TEMP/TIME button, set the temperature, temperature can be set at 1 difference range from 16-32 oC. (3)Press the WIND button, you can select fan speed from “Power”, “High”, “Low”, “Mute”. (4)Press the ON/OFF button, the operation indicator is on, the air-conditioner starts to operate in the Cooling mode. Drying operation mode (1) (2) (3) Press the MODE button, select the Drying operation mode. Press TEMP/TIME button, set the temperature, temperature can be set at 1 oC difference range from 16-32 oC. Press the ON/OFF button, the operation indicator is on, the air-conditioner starts to operate in the Drying mode. Remark: In the drying operation mode, the fan speed is automatically set to “Mute”. Circulation operation mode (1) Press the MODE button, select the Circulation operation mode. (2) Press the WIND button, you can select fan speed from “High”, “Low”, “Mute”. In the circulation operation mode, you cannot select the speed of “Power”. [. . . ] Valve the wise to for 8 at all by Electrical connection Unscrew the screw, take off the control panel cover from the unit. Cooling type: connect the wire to the related connection point on the panel and connect the signal connection plug. 45 Remarks: yellow and green cord should be connected to connection point with Fasten the fixture of wire to control panel. Make sure that both the liquid valve and gas valve on the side are completely open. [. . . ]