User manual HAUPPAUGE WINTV-HVR-900 MCE-KIT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAUPPAUGE WINTV-HVR-900 MCE-KIT. We hope that this HAUPPAUGE WINTV-HVR-900 MCE-KIT user guide will be useful to you.
Manual abstract: user guide HAUPPAUGE WINTV-HVR-900 MCE-KIT
Detailed instructions for use are in the User's Guide.
[. . . ] Click Next.
N
ote: at this point, Media Center will set up the TV tuner. This might take a
WinTV Media Center Kit Quick Installation Guide
WinTV-HVR-900 MCE-Kit
© Hauppauge Computer Works, Inc. [. . . ] This guide can be found on the Hauppauge website in: http://www. hauppauge. com/pages/support/support_hvr950. html
1 4 QI-HVR900_MCEKIT-V4. 0-ENG March 28, 2007
Installation overview
Step 1. After starting Windows, install the WinTV-HVR device driver from the WinTV Installation CD-ROM. Install the Media Center Remote control receiver/blaster The Media Center remote control receiver/blaster box is a small USB Media Center device which both receives remote remote control commands and transmits commands via its IR Blaster to Start button change channels on a cable TV or satellite set top box. To install the Media Center remote control receiver/blaster, simply plug one ned of the supplied USB cable into the Media Center remote control receiver/blaster box and the other end it into any USB port on your Vista Home Premium, Vista Ultimate or Windows XP Media Center PC. Media Center will automatically load the drivers for the MCE remote control. This will take one or two minutes.
IR transmitter cable
Detailed installation instructions
Step 1: Install the WinTV-HVR-900 in your Vista PC Turn on your Windows Vista PC or laptop, and boot into Windows. Locate a free USB 2. 0 port (normally located at the side or back on the laptop or desktop). You can use a USB extender cable to locate the WinTV-HVR-900 a short distance from your USB slot. Plug an antenna for DVB-T digital TV reception, or either cable TV or a TV antenna for analog TV reception, into the TV connector on WinTV-HVR-900. It is recommended to connect to a roof top aerial during the first time installation. This will provide better signal quality then the provided portable antenna. Note: With Media Center, you need to choose between analog cable TV or DVB-T digital TV reception. Note: If you plug the device into a different USB socket, you will need to reinstall the WinTV-HVR-900 driver, but you will not need to reload any WinTV applications. Note: Due to power and bandwidth requirements, we do not recommend connecting WinTV-HVR-900 into a USB Hub. [. . . ] TV Tuner set up under Media Center Run the Windows Media Center application by clicking on the icon which is on your Windows background. Click Next when this download is complete.
Found new hardware in Vista 2 3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAUPPAUGE WINTV-HVR-900 MCE-KIT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAUPPAUGE WINTV-HVR-900 MCE-KIT will begin.