User manual HOMELITE HG5700

[. . . ] Your generator has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. You WILL be KILLED or SERIOUSLY HURT if you do not follow the instructions in this operator's Thank you for your purchase. This product has many features for making its use more pleasant and enjoyable. [. . . ] Inspect the unit carefully to make sure no damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call 1-800-242-4672 for assistance. If any parts are damaged or missing do not operate this product until the parts are replaced. Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. NOTE: Do not put fuel or lubricant in the generator before installing the feet, frame support, and wheels. Locate the following items: 2 rubber feet 2 lock nuts (1/4-20) 2 washers (1/4 in. Install the frame support on the bottom of the generator frame on the same side as the handle. Locate the following items: Frame support 2 flange nuts (5/16-18) 2 washers (5/16 in. ) Raise the end of the generator where the recoil starter is located high enough to gain access to the frame bottom; securely position props underneath to support. align the holes on the frame support with the holes on the generator frame. Slide a washer on the bolt, then insert the bolt through the hole in the generator frame so it extends down through the frame support. Wheels are provided to assist in moving the generator to the desired location and should be installed on the side opposite the handle. 38 ID) 2 wheels 2 lock nuts (3/8-16) Raise the end of the generator opposite the handle high enough to gain access to the frame bottom; securely position props underneath to support. Thread another washer on the bolt, then slide the bolt through the U-bracket frame on generator. Locate the following items: Handle lock pin Lanyard Attach the lanyard to the handle lock pin and the handle as shown in figure 4. NEVER use inside a home or garage, EVEN IF doors and windows are open. Attempting to start the engine before it has been properly filled with lubricant will result in equipment failure. Never use a generator inside homes, garages, crawlspaces, or other partly enclosed areas. Using a fan or opening windows and doors does NOT supply enough fresh air. ONLY use a generator outdoors and far away from open windows, doors, and vents. [. . . ] Period of Warranty -- Any new Yamaha SORE engine purchased for private, non-commercial use from an authorized Yamaha SORE engine dealer in the continental United States will be warrantied against defects in material or workmanship for a period of two (2) years from date of purchase, subject to exclusions noted herein. Any Yamaha SORE engine purchased and utilized for commercial applications will be warrantied for a period of one (1) year from the date of purchase, subject to exclusions noted herein. For Yamaha SORE engines used in a rental application, the warranty will be for ninety (90) days from the date of purchase, subject to the exclusions noted herein. During the period of warranty any authorized Yamaha SORE engine repair station will, free of charge, repair or replace, at Yamaha's option, any part adjudged defective by Yamaha due to faulty workmanship or material from the factory. [. . . ]