User manual HOMELITE HL80220

[. . . ] Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. A - On/off switch (commutateur marche / arrêt, interruptor de encendido) B - Nozzle storage (rangement de buses, almacenamiento para boquilla) C - Spray wand (lance de pulvérisation, tubo de rociado) D - Detergent tank (réservoir de détergent, tanque de detergente) E - Hydrosurge/detergent lever (levier « Hydrosurge/détergent », palanca de Hydrosurge/detergente) F - High pressure trigger lock-out (dispositif de verrouillage de la gâchette à haute pression, seguro de gatillo de alt a presión) G - High pressure trigger (gâchette à haute pression, gatillo de alt a presión) H - Hose (tuyau, manguera) I - Telescoping handle (poignée télescopique, mango telescópico) J - Power cord storage (rangement de cordon d'alimentation, almacenamiento para cordón de corriente) K - G-Clean Detergent Injector (injecteur de détergent, inyector de detergente) A - High pressure hose (tuyau de haute pression, manguera de alt a presión) B - Low pressure hose (tuyau de basse pression, manguera de la presión baja) C - Latch (loquet, broche) D - Hose lock (verrouillage de tuyau, seguro de la manguera) A - Hydrosurge/low pressure (high flow) lever (pression Hydrosurge/faible, palanca de presión baja [alto flujo]/ Hydrosurge) B - High pressure trigger (gâchette à haute pression, gatillo de alt a presión) C - Lock-out (verrouillage, seguro) This product has many features for making its use more pleasant and enjoyable. [. . . ] Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. to remove , depress the latch on top of the fitting and remove the hose from the spout. The high pressure hose has a metal connection and slides into the opening at the top of the trigger handle. Grasp the hose lock and pull outward to clear the way for the high pressure hose to be inserted. Push the hose lock fully back into the handle to hold the high pressure hose in place. Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Failure to comply could result in accidental starting and possible serious personal injury. Always observe all local regulations when connnecting hoses to the water main. Some areas have restrictions against connecting directly to public drinking water supply to prevent the feedback of chemicals into the drinking water supply. Direct connection through a receiver tank or backflow preventer is usually permitted. NOTE: There must be a minimum of 10 feet of unrestricted garden hose between the water intake and the garden hose faucet or shut off valve (such as a "Y" shut off connector). Run water through the garden hose for 30 seconds to clean any debris from the hose. To connect the garden hose to the machine through G-Clean detergent injector: Loosen bracket screws and remove bracket. If the screen is damaged, do not use the machine until the screen has been replaced. If the screen is dirty, clean it before connecting the garden hose to the machine. With the garden hose faucet turned completely off, attach the end of the garden hose to the G-Clean detergent injector. With the garden hose faucet turned completely off, attach the end of the garden hose to the water intake. [. . . ] If using an extension cord, make sure it is heavy enough to carry the current of the pressure washer. Remove the water inlet filter, rinse with warm water, then replace in unit. If this does not correct the problem, contact your authorized service center to purchase a new wand. Pump doesn't produce pressure Inadequate water supply Spray wand leaks Nozzle is clogged Pump is faulty Air in line Water inlet filter is clogged or dirty Machine doesn't reach high pressure Diameter of garden hose is too small Water supply is restricted Not enough inlet water Detergent injector is empty The dial on the detergent injector is turned completely clockwise Water supply is inadequate or clogged Warrants to the original retail purchaser that this Homelite® brand pressure washer is free from defect in material and workmanship and agrees to repair or replace, at Homelite Consumer Products, Inc. [. . . ]