User manual HP DESKJET 1120C

[. . . ] User's Guide HP DeskJet 1120C Professional Series This User's Guide with video help is also available in electronic copy in the Starter CD. Acknowledgements HP ColorSmart II, HP PhotoREt II and HP ZoomSmart Scaling Technology are trademarks of Hewlett-Packard Company. Windows is a trademark of Microsoft Corporation. Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] To enable this, double-click the Printers icon in the Control Panel and choose Use print manager. · Installing Printer Software in Windows for Workgroup 3. 11 At the server: I. If the server is running Novell Netware 3. 12 & 4. 11, set up the printer and make the cable connections to your network. II. If the server is running Windows NT 4. 0 , ensure that your printer port is shared. 1 2 3 Set up the printer and make the cable connections to your network. Select the HP DeskJet 1120C printer in the Printers folder, right-click the mouse and select Properties. 4 Go to the Ports tab, select Add Port, and configure the type of Port Monitor you wish to use for this shared printer, such as HP JetDirect Port. Be sure to set up this printer so that it is "shared". 15 At the client : 1 2 3 4 5 6 Install the printer software from the Starter CD (see page 6). When prompted for the printer name and port, choose "HP DeskJet 1120C Printer" and either "None" or the Port (LPT1:) for the port that you wish to redirect the printer to. Select Printers from the Windows Control Panel, click on the HP DeskJet 1120C printer icon, then click Connect. To set up the printer as a permanent network printer on your system, click the Permanent box, and then click Connect. Section 2 - Printing Basics Installing Printer Software in Windows 95 / NT 4. 0 At the server : I. If the server is running Novell Netware 3. 12 & 4. 11, set up the printer and make the cable connections to your network. II. If the server is running Windows NT 4. 0 , ensure that your printer port is shared. 1 2 3 Set up the printer and make the cable connections to your network. Select the HP DeskJet 1120C printer in the Printers folder, right click the mouse and select Properties. 4 Go to the Ports tab, select Add Port, and configure the type of Port Monitor you wish to use for this shared printer, such as HP JetDirect Port. Be sure to set up this printer so that it is "shared". At the client : Note: If both the client and the server are running Windows NT 4. 0, skip the following steps and use Network Printer Server in NT 4. 0 (Point-and-Print) to install the printer software. 1 2 3 Install the printer software from the Starter CD. To access the Properties sheet of your printer, right-click on your printer icon in the Printers folder and select Properties. 4a Windows 95: Go to the Details tab, select Add Port, select Local Port and type the name of the server followed by the name of the printer, such as \\ComputerName\\PrinterName. 4b Windows NT 4. 0: Go to the Ports tab, select Add Port, highlight Local Port, select New Port and type the name of the server followed by the name of the printer, such as \\ComputerName\\PrinterName. Note: 16 If the server is running Windows NT 4. 0, install the JetAdmin software which comes with the JetDirect products. Printing from DOS Software Programs When printing in DOS, there are two different ways you can adjust print settings: the HP DeskJet Control Panel for DOS and DOS printer drivers. HP DeskJet Control Panel for DOS DOS users have access to many printer features through specific DOS printer drivers; however, many software manufacturers do not develop printer drivers for their software programs. Use the DeskJet Control Panel to specify the default printer setting for printing from your DOS program. Note: HP DeskJet Control Panel does not support printing of special features. Section 2 - Printing Basics Installing the HP DeskJet Control Panel for DOS Before you install the Control Panel, make sure you have setup your printer and that the printer is turned on. At the DOS prompt C:\>, type the CD-ROM drive letter and change the directory to \driver\win\disk3, e. g. Follow the instructions on your computer screen to complete installation. [. . . ] Extent of Limited Warranty Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from detects in material and workmanship for the duration specified above, which duration begins on the date of purchase by the customer. For software products, HP's limited warranty applies only to a failure to execute programming instructions. HP does not warrant that the operation of any product will be uninterrupted or error free. HP's limited warranty covers only those defects which arises as a result of normal use of the product, and does not cover any other problems, including those which arises as a result of: a. [. . . ]