User manual HP IPAQ 114 CLASSIC HANDHELD IPAQ 100 SERIES CLASSIC HANDHELD - PRODUCT GUIDE

[. . . ] HP iPAQ Product Guide © Copyright 2007 Hewlett-Packard Development Company, L. P. HP iPAQ products are powered by Microsoft® Windows Mobile® 6. 0 Classic with Messaging and Security Feature Pack. Microsoft Windows, the Windows logo, Outlook, and ActiveSync/Windows Mobile Device Center are trademarks of Microsoft Corporation in the U. S. Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L. P. [. . . ] If these settings are not on your computer or need to be changed, you can change them manually. Before you begin, obtain the following information from your ISP or network administrator: User name Password Proxy Server name Port Type of Socks protocol used To set up proxy server settings: 1. If a proxy server has not been set up, tap Set up my proxy server, else tap Edit my proxy server. Select the This network connects to the Internet and This network uses a proxy server to connect to the Internet check boxes. To change such settings as port number or proxy server type, tap Advanced and change the required settings. Set up a WAP gateway To access Wireless Access Point (WAP) sites through Internet Explorer, configure your device to use a WAP gateway. Before you begin, obtain the following information from your ISP or network administrator: User name Password ISP server phone number Advanced settings 27 1. 6. WAP gateway server name Port number Tap Start > Settings > Connections > Connections > Advanced > Select Networks > My Work Network > Edit. . . . On the Proxy Settings tab, select the This network connects to the Internet and This network uses a proxy server to connect to the Internet check boxes. Enter any logon credentials required by the WAP gateway server. Configure advanced proxy settings 1. For the appropriate server type, enter the proxy server name and port. If necessary, enter the credentials for connecting with your proxy server. If using Socks 5, enter the credentials for connecting with your proxy server. Advanced connection settings 1. (WLAN) icon to turn on WLAN. To connect to a network, tap Start > Settings > Connections > Connections > Advanced > Select Networks. Select My ISP to connect to the Internet through an ISP or select My Work Network to connect to a company network. If you need to change or create a new network management name, tap Edit. . . From the Connections screen, tap Advanced to set up your Dialing Rules and Exceptions and tap ok. 5. Set up a VPN server connection A VPN connection helps you to securely connect to servers, such as a corporate network, via the Internet. Before you begin, obtain the following information from your network administrator: User name Password Domain name TCP/IP settings Host name or IP address of the VPN server 28 Chapter 6 Connections To set up a VPN server connection: 1. Under My Work Network, tap Add a new VPN server connection and follow the instructions in the New Connection wizard. Under most circumstances, you should not change any advanced settings. However, you need to change advanced settings when: The server to which you are connecting does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings. You need to change server DNS or WINS settings. If either of these circumstances applies, from the My VPN screen, tap Advanced and fill in the appropriate information. To view additional information for any screen in the wizard or while changing settings, tap Help. Change a connection group name Your device is already set up with two groups of connection settings: My ISP and My Work Network. [. . . ] Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. No metallic body accessories are allowed and 1. 5 cm spacing between PDA and the body must be maintained to satisfy RF Exposure. This PDA has been tested and demonstrated compliance when Bluetooth and Wi-Fi are transmitting simultaneously. [. . . ]