User manual HP LASERJET 1320

[. . . ] HP LaserJet 1160, 1320, 1320n, 1320tn, 1320nw Use hp LaserJet 1160 and hp LaserJet 1320 series printer User Guide Copyright information © 2004 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part number: Q5927-90913 Edition 1, 09/2004 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. [. . . ] Do a File-Print, select Plug-In Preferences, and click the right-facing arrow. The right-facing arrow changes to a down-facing arrow, and the hp Manual Duplex&Booklet feature displays. Select Print Time Filters, select hp Manual Duplex&Booklet , and click Save Settings. d. After side one has printed, remove the remaining paper from the input tray, and set it aside until after you finish the manual two-sided print job. The printed side should be facing up with the bottom edge towards the printer first. Press the GO button on the control panel to print side two. Manual two-sided printing using the straight-through output door The following sections provide instructions for the different operating systems. ENWW Printing on both sides of the paper (manual two-sided printing) 61 Windows 1. Access the printer Properties (or Printing Preferences in Windows 2000 and XP). On the Device Settings tab, select the option to allow manual two-sided printing. Note Not all printer features are available in all drivers or operating systems. See the printer Properties (driver) online Help for information about availability of features for that driver. Print the document using the single-sheet priority input slot (Tray 1). Feed the pages into the slot one at a time. 62 Chapter 4 Printing tasks ENWW 6. Turn the printed side down with the top edge toward the printer. 7. Feed the pages into the single-sheet priority input slot (Tray 1) one at a time, starting with the first sheet printed. Feed the printed side facing down and the top edge forward. Mac OS 9 (HP LaserJet 1160 printer) Note For the HP LaserJet 1160 printer, two-sided printing is not supported in Mac OS X. Print the document using the single-sheet priority input slot (Tray 1). After side one has printed, remove the remaining paper from the input tray, and set it aside until after you finish the manual two-sided print job. Feed the pages into the single-sheet priority input slot (Tray 1) one at a time, starting with the first sheet printed. Mac OS 9 (HP LaserJet 1320 series printer) Note For the HP LaserJet 1320 series printer, two-sided printing is not supported in Mac OS X. If Manual Duplex does not appear as a printer option, perform the following steps: ENWW Printing on both sides of the paper (manual two-sided printing) 63 a. Verify that hp Manual Duplex&Booklet (Classic) was selected when the software driver was installed with the Custom Install option. Do a File-Print, select Plug-In Preferences, and click the right-facing arrow. The right-facing arrow changes to a down-facing arrow, and the hp Manual Duplex&Booklet feature displays. [. . . ] The gold contacts should be pointing left and the cutouts should be at the top left and center left. 156 Appendix D HP parts and accessories ENWW 6. Carefully press the DIMM into the slot, making sure that it is straight and all the way in. To snap the cam latches into place, press the handles toward each other. 7. Plug the printer back in, and turn on the power switch. ENWW DIMMs (memory or font) 157 Testing the DIMM installation To test the DIMM installation, print a configuration page, and check the Total Memory specified on the page. [. . . ]