User manual HP NOTEBOOK EXPANSION BASE XB2000

[. . . ] Connect USB devices; USB 2. 0 compatible. 1 2 3 4 5 6 Expansion cable Power connectors (3) USB ports (2) RJ-11 (telephone) jack Connects the Expansion Base to an RJ-11 wall jack. RJ-45 (network) jack S/PDIF (Sony/Philips Digital Interface) digital audio jack Composite video jack S-Video jack Hard drive power connector Connects an Ethernet cable from the Expansion Base to an RJ-45 wall jack. Connects to a compatible audio/video receiver through a digital coaxial cable. Connects the power cord for the optional internal hard drive. 7 8 9 (continued) Reference Guide 1­3 Getting Started Component Description Connect optional security cables. - Kensington security slots (2) The purpose of security solutions is to act as a deterrent. [. . . ] While the button on the receiver is flashing, press the connect button on the bottom of the keyboard 2. 12. If you haven't already done so, connect the Expansion Base to your notebook following the instructions in Chapter 1, "Getting Started. " 2. Connect one end of the Ethernet cable to the RJ-45 (network) jack on the Expansion Base 1 and the other end to the RJ-45 wall jack 2. Use the RJ-45 jack on the Expansion Base instead of the one on the notebook. The RJ-45 jack on some notebooks may be disabled when the notebook is installed in the Expansion Base. It is not necessary to connect a modem cable between the notebook and Expansion Base if you are connecting the Expansion Base directly to a network. 2­12 Reference Guide Using the Expansion Base Connecting Video You can connect the Expansion Base to a television and use the television as an external display. The Expansion Base provides 2 video-out ports on the rear panel, a composite video jack and an S-Video jack. The S-Video connection provides better display quality, but may not be available on all televisions. Refer to your television documentation to determine if S-Video connection is supported. Composite Video Connection To connect through composite video: 1. Connect a composite video cable (not included) into the yellow composite video jack on the back of the Expansion Base 1. Connect the other end of the cable into the composite video jack on your television 2. The location of the jack on your television may vary by manufacturer and model. Reference Guide 2­13 Using the Expansion Base 3. Refer to the instructions provided with your notebook to configure the television as the primary display or to configure advanced video features. S-Video Connection To connect through S-Video: 1. Connect an S-Video cable (not included) into the S-Video jack on the back of the Expansion Base 1. Connect the other end of the cable into the S-Video jack on your television 2. Refer to your television documentation for the connector location. 2­14 Reference Guide Using the Expansion Base 3. Refer to the instructions provided with your notebook to configure the television as the primary display or to configure advanced video features. Connecting Audio The Expansion Base provides an S/PDIF digital audio jack for an optional digital audio connection. A coaxial digital audio cable (not provided) and an audio receiver (television or stereo) with a coaxial digital audio port is required to fully enable this feature. Connect a coaxial digital audio cable into the orange S/PDIF digital audio jack on the back of the Expansion Base 1. Connect the other end of the cable into the digital audio jack on your television or stereo equipment 2. Refer to your television or stereo equipment documentation for the connector name and location. Reference Guide 2­15 Using the Expansion Base 3. Under Other Controls, select the check box for your digital audio system. Open InterVideo DVD by inserting a DVD or selecting Start > All Programs > InterVideo DVD > InterVideo DVD. [. . . ] Remove the notebook from Standby or Hibernation mode. The speakers have little or no volume. The notebook shuts down unexpectedly. The Expansion Base Adjust the volume scroll speakers are muted or wheel. The Expansion Base is not connected to AC power, draining the notebook battery pack. Connect the AC adapter from the Expansion Base to an AC power outlet. (continued) Reference Guide A­3 Troubleshooting Problem The wireless keyboard or mouse does not work. Possible Cause The receiver is not connected to an available USB port. [. . . ]