User manual HP PSC 750 ALL-IN-ONE

[. . . ] No part of the document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. wARNING: Potential Shock Hazard 1 Read and understand all instructions in the Setup Poster. [. . . ] If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper on top of the transparency. Chapter 4--Load paper or transparency film, or load originals To avoid paper jams, remove papers from the output tray frequently. Output tray capacity is affected by the type of paper and the amount of ink you are using. For more information about output-tray capacity, see "Technical information. Chapter 4--Load paper or transparency film, or load originals The HP Workplace is a centralized program in which you can perform a variety of functions relating to your HP PSC. You can access the HP Workplace in the following ways: · The left pane allows you to navigate through the computer's hard drives. You can use the HP Workplace to add annotations, such as rubber stamps and notes, to scans that you have already saved on your hard drive. The HP Workplace allows you to set up links that associate a program with a particular icon. Select the type of program that the link you are creating will invoke, and then click Next. The Create Link dialog box displays a choice of specific programs associated with the category you have chosen. For detailed instructions on invoking each of these programs, see the appropriate section in the Onscreen Guide. After you create a link, the associated icon appears on the bottom of the HP Workplace. You can then open a file in the associated program by dragging and dropping files onto the icon. 1 2 In the file-view pane of the workplace, locate the files that you want to send to the program associated with a particular link. 127( Multi-page files are exported into multiple files of the selected type before being passed to the link. Press or until the applicable program appears on the front-panel display, and then press Start Scan. Place your cursor in the HP Scan Window, and then click and drag to highlight the portion of the image to be sent to the selected destination. Using your HP PSC, you can: · Produce high-quality color and black-and-white copies using a variety of paper types and sizes, including iron-on transfers. Reduce or enlarge the size of the copies you make from 25% to 400% of the copy's original size. ) Make the copy lighter or darker, adjust the color intensity, select the number of copies, and specify the quality of the copies you make. Use creative copying features to enlarge a vacation photo (or anything else) for display on a wall as a poster, make wallet-size photos to give to family members, make high-quality copies of photos using special photo paper, or copy a report onto transparency film for use in a presentation to a client. You can make copies using the front panel of your unit or using your computer. [. . . ] If you have Internet access, you can get help from the HP Web sites at either of the following: www. Com Here you can find technical support, supplies and ordering information, project tips, and enhancement recommendations to help you get the most from your unit. Software programs from other companies may be included with your HP PSC. If you experience problems with any of those programs, you will receive the best technical assistance by calling the experts at that company. [. . . ]