User manual HP SCANJET 8300

[. . . ] " Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws. All other products mentioned herein may be trademarks of their respective companies. [. . . ] Click USB, and then select the model number of your scanner from list, if it is not already selected. You can connect this scanner to a computer using a SCSI card and cable that meet the requirements shown below. These requirements are the same as those on any SCSI flyer that might be included in the scanner box. The SCSI card must be compliant with the operating system that your computer is running. The SCSI card must have a connector visible on the back of the computer that allows you to connect a SCSI cable. The SCSI cable must have a connector on one end that matches the SCSI connector on the computer (see example below). The other end of the SCSI cable must have a connector that matches the highdensity, mini 50-pin connector on the scanner (see example below). If you have other SCSI devices to connect to the SCSI card, connect the scanner to the last device in the chain. For more information, see the documentation that came with the SCSI card. To test the SCSI installation Note: 1 2 3 4 5 6 7 8 9 If you get an error message while testing the SCSI installation, follow the directions in the message. Choose Control Panels from the Apple menu, and then choose HP ScanJet Controls from the submenu. Once you enter the section that covers your scanner model, you will be able to choose information about setting up and using your scanner, downloading drivers, solving a problem, ordering, and information about the warranty. HP assistance If you cannot find an answer to your question using the sites listed above, visit www. From there, you can discover how to contact HP via e-mail, phone, and other methods. HP has not reviewed all of these third-party sites and does not control and is not responsible for any of these sites or their content. Thus, HP does not endorse or make any representations about them, or any information, software or other products or materials found there, or any results that may be obtained from using them. If you decide to access any of the third-party sites, you do this entirely at your own risk. ConnectCom Solutions website If you need to install a SCSI card on your computer to connect the computer to the scanner, HP recommends buying and installing a ConnectCom Solutions SCSI card. Visit the ConnectCom Solutions website for information about the recommended SCSI card, or to check for and download updated drivers for the card. In addition to the Web, you can contact HP by telephone or mail for support and service for your scanner. Prices, availability, and hours of support are subject to change without notice. How HP can help HP's support hotline can help resolve problems with: For questions relating to operating systems or network configurations, contact your point of purchase or internal support department. [. . . ] Replacement products may be either new or equivalent in performance to new. HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software which does not execute its programming instructions due to such defects. hP does not warrant that the operation of HP products will be uninterrupted or error free. [. . . ]