User manual HP SURESTORE 125EX OPTICAL JUKEBOX HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - C1118-90000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP SURESTORE 125EX OPTICAL JUKEBOX. We hope that this HP SURESTORE 125EX OPTICAL JUKEBOX user guide will be useful to you.
You may also download the following manuals related to this product:
HP SURESTORE 125EX OPTICAL JUKEBOX (3256 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX (3312 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX annexe 1 (3256 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX STORAGEWORKS LIBRARY AND TAPE TOOLS FAQ - WINDOWS GUI VERSION - (724 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX JUKEBOX OTTICO SURESTORE 125EX - GUIDA PER L'UTENTE, NON ORDINABILE (5070 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - NOT ORDERABLE (3142 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - NOT ORDERABLE (5003 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - NOT ORDERABLE (4989 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - NOT ORDERABLE (4108 ko)
HP SURESTORE 125EX OPTICAL JUKEBOX OPTICAL DRIVE AND LIBRARY SCSI-2 COMMAND REFERENCE (9094 ko)
Manual abstract: user guide HP SURESTORE 125EX OPTICAL JUKEBOXHEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX USERS GUIDE - C1118-90000
Detailed instructions for use are in the User's Guide.
[. . . ] NEXT
HEWLETT-PACKARD SURESTORE 125EX OPTICAL JUKEBOX
USER'S GUIDE
Edition 1
JUMP
CONTENTS
INDEX
PRINT
Manufacturing Part Number: HP Part No. C1118-90000
Greeley, CO USA © Copyright August 1999
1
NOTICE
This document contains information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice.
NEXT
PREVIOUS
Hewlett-Packard makes no warranty of any kind with regard to this printed material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. [. . . ] On - When a Rotate Mailslot command is received (either from the control panel or from the host), the mailslot is toggled open or closed.
INDEX
33-39 40
Not used Used by service personnel only. Changing these configurations may result in an inoperable jukebox.
24
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
Table 3-1: Configurations
Number Function Default Settings
41
Forces the optical drive to execute a verify after every write
ON
ON - Write verify is forced. OFF - The drive may write verify or not, depending on how they are manually configured or how they are configured by the jukebox application software.
42-65 66
Not used Used by service personnel only. Changing these configurations may result in an inoperable jukebox.
JUMP
CONTENTS
INDEX
25
3
NEXT PREVIOUS
OPERATING THE JUKEBOX RETRIEVING INFORMATION LOGGED BY THE JUKEBOX
Figure 3-10: Menu Tree - Retrieving Information
JUMP
CONTENTS
INDEX
26
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
You can display information about the operations of the jukebox by using the INFO * option. If you select any log except 4 (drive cartridge loads), the log information displays immediately. If you select log 4, DRIVE 1 displays and you can press ENTER for Drive 1 information. If your jukebox has two optical drives, you can press NEXT (DRIVE 2 displays) and ENTER to access Drive 2 information.
JUMP
5. Description
1 4 5 9
Firmware revision of the jukebox Total cartridge loads for the drive. Operation hours (power on time) Total moves and move attempts by the disk transport mechanism.
27
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
Table 3-2: Information Logs
No. 17 Optical drive 2 SCSI ID (if installed) Other logs are used by service.
JUMP
CONTENTS
INDEX
28
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
CHANGING SCSI IDS
Figure 3-11: Menu Tree - Changing SCSI IDs
JUMP
CONTENTS
INDEX
29
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
The jukebox controller uses two SCSI IDs if your jukebox has one drive and three IDs if your jukebox has two drives. The jukebox controller is assigned one ID and one ID is assigned to each disk drive. The default SCSI IDs are as follows · jukebox controller = 3 disk drive 1 (lower drive) = 4 disk drive 2 (upper drive in a two-drive model) = 5 If you are already using one of these IDs for your host bus adapter or another SCSI peripheral device, follow the directions in one of the next two sections to change either the jukebox controller or a drive ID.
JUMP
CHANGING THE JUKEBOX CONTROLLER ID
Start with READY or SECURE in the display. ("AC" is the "jukebox controller. ")
CONTENTS
INDEX
3. SET # (# is a number from 0-7) displays briefly and then AC ID * displays again. Press CANCEL two times to return to the READY state.
30
3
NEXT PREVIOUS
OPERATING THE JUKEBOX
NOTE: CONFLICT displays if you attempt to set the jukebox controller and a drive to the same ID. Repeat the procedure and
reset one of the IDs to another, non-conflicting ID.
NOTE: After you change an ID you may have to restart your host computer for the new ID to be recognized.
Caution: Do not turn power to STANDBY in this jukebox until you are sure the SCSI bus is inactive. Removing power from a SCSI
peripheral when the bus is active can result in data loss and/or indeterminate bus states. Check your host system manuals for information about checking the SCSI bus status.
7. Switch the jukebox standby/on switch to STANDBY, the back to ON to save the new SCSI ID in jukebox memory.
CHANGING AN OPTICAL DRIVE ID
Start with READY or SECURE in the display. ("AC" is the "jukebox controller. ")
JUMP
CONTENTS
3. Press NEXT until DRV 1 ID * or DRV 2 ID * (if your jukebox has two drives) displays. displays, where "#" is the number of the drive you selected in step 3 and "?" is the ID to which your selected drive is currently set.
INDEX
5. [. . . ] disk See optical disk.
PREVIOUS
driver A program that allows the operating system to communicate with a peripheral device.
JUMP
E-L
element A SCSI term for any one of the autochanger components -- drive, mailslot, storage slots, or picker.
CONTENTS
front panel The part of the jukebox that includes a control panel used to manage and display functions, and a mailslot to insert and remove disks. high-voltage differential SCSI Signals are asserted on the bus by using two lines for each signal and measuring the voltage difference between the signals. Differential retains more signal quality than single-ended and is not as sensitive to noise, allowing for a longer cable length. HVD See high-voltage differential SCSI.
INDEX
PRINT
1
jukebox A term synonymous with optical disk library or autochanger. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP SURESTORE 125EX OPTICAL JUKEBOX
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP SURESTORE 125EX OPTICAL JUKEBOX will begin.