User manual HP W1907V

[. . . ] User's Guide vp15 LCD Monitor vp17 LCD Monitor vp19 LCD Monitor FP1707 LCD Monitor WF1907 LCD Monitor w1707 LCD Monitor w1907 LCD Monitor w2007 LCD Monitor w2207 LCD Monitor w2216 LCD Monitor w2408 LCD Monitor The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP. [. . . ] The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the bottom if you scroll up at the top of the selections. If you don't want to save the setting, select Cancel from the Sub-Menu or Exit from the Main Menu. When a NOTE: are savedmenu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings and the menu closes. User's Guide 4­3 Operating the Monitor OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: Cancel -- to return to the previous menu level. Save and Return -- to save all changes and return to the OSD Main Menu screen. Reset -- to change back to the previous setting. Main Menu Options Switch Video Input (select models only) Brightness Contrast Image Control Auto-Adjustment Horizontal Position Vertical Position Custom Scaling (select models only) Icon Submenu Options Description Switches the video input signal source when the monitor is connected to two active and valid video sources. Also enables or disables the ambient light sensor (select models only). Selects the method on how displayed information on the monitor will be formatted. Select: Fill to Screen -- Image fills the entire screen and might look distorted or elongated because of non-proportional scaling of height and width. Fill to Aspect Ratio -- Image is sized to fit the screen and maintains proportional image. On a scale of 1 to 5, adjusts the screen image to look sharper or softer. Sharpness (select models only) NOTE: If the one-to-one custom scaling menu is selected, scaling is disabled and the Sharpness feature is as well. Ambient Light Sensor (select models only) Adjusts the brightness of the screen depending on the ambient light of the environment. If you adjust the Quick View, Brightness, Contrast, or sRGB functions in the OSD, the ambient light sensor will automatically be disabled. Clock Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock will also change the horizontal screen image (VGA Input only). This adjustment allows you to remove any horizontal noise, and clear or sharpen the image of characters (VGA Input only). Clock Phase 4­4 User's Guide Operating the Monitor Icon Main Menu Options Color Submenu Options Description (Continued) Selects the screen color. The factory default is 6500 K or Custom Color, depending on the model. 9300 K 6500 K Custom Color Changes to slightly blueish white. Selects and adjusts your own color scales: R -- Sets your own red color levels. Sets your screen colors to adapt to the color standards used in the image technology industry. Selects viewing mode. sRGB Quick View Movie Photo Gaming Text Custom Language Management Volume OSD Control Selects the movie mode. Settings saved when user adjusts the Brightness, Contrast, or Color in one of the Quick View options. Horizontal OSD Position -- Changes the viewing position of the OSD menu to the left or right area of the screen. Vertical OSD Position -- Changes the viewing position of the OSD menu to the top or bottom area of the screen. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]