User manual INDESIT IDCL85BH

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT IDCL85BH. We hope that this INDESIT IDCL85BH user guide will be useful to you.


INDESIT IDCL85BH : Download the complete user guide (1030 Ko)

Manual abstract: user guide INDESIT IDCL85BH

Detailed instructions for use are in the User's Guide.

[. . . ] Troubleshooting, 15 Assistance and Guarantee, 16 Spare parts Information on recycling and disposal 1 Installation Where to install the tumble dryer • Install the dryer far from gas ranges, stoves, radiators or hobs, as flames may damage it. If the dryer is installed below a worktop, en15 mm 15 mm sure there are 10 mm between the upper panel of the dryer and any objects above it, and 15 mm between the sides of the machine and the walls or furniture units adjacent to it. The appliance must be installed with the rear surface placed against a wall. 10 mm GB Electrical connections Before plugging the appliance into the socket, check the following: • Make sure your hands are dry. [. . . ] They indicate the following: Before each programme, the indicators light CLEAN FILTER and EMPTY WATER signals that it is essential to clean the filter and the water container must be emptied, before using the tumble dryer (see Care and maintenance). If the water container fills during the course of the programme, the LED lights up. The water container must be emptied before pressing the START/PAUSE button to resume the cycle from the point it was interrupted. The “Clean condenser unit” indicator light Care and maintenance). (CLEAN CONDENSER) signals that it is essential to clean the condenser regularly (see “Drying phases” indicator lights The The DRYING indicator light signals that the drying phase is running. COOL TUMBLE indicator light signals that the cooling phase is running. €œDelay timer” indicator light If the ”Delay timer” option has been activated (see “Programmes and options”), after the programme has started, the indicator light corresponding to the chosen delay time will start flashing: As time passes, the remaining delay will be displayed and the corresponding indicator light will flash: Once the set delay time ends, the flashing LED will turn off and the set programme will start. 9 How too carry out a drying cycle GB Starting and selecting a programme 1. Open the door, ensure that the filter is clean and securely placed and that the water container is empty and correctly slotted (see Care and maintenance). Load the machine, making sure that no piece of laundry gets between the door and the relative seal. After consulting the programme chart and the indications for each type of fabric (see Laundry), turn the Programme selection knob towards the programme corresponding to the type of laundry to be dried (see Programmes and options). Cotton Fast Iron: Dries your items to a dryness level that allows them to minimise ironing. This program can also used for delicates/acrylic fabrics (2kg) with LIGHT DRYING option on Easy Mix This programme is ideal for drying cotton and synthetic fabrics together. 11 GB Wool This programme is specific for items that withstand tumble drying and are labelled with the symbol. Garments dried with this programme are usually ready to be worn, although the edges of heavier garments may be slightly damp. Leave them to dry naturally, as an additional drying process may damage them. Unlike other materials, the shrinking process in wool is irreversible, i. Fitness This programme is studied for safely drying garments such as tracksuits and Fitness suits bearing the up to 4 kg. Suitable for loads of Outwear Programme This programme is specific for drying water-repellent fabrics and sports jackets (e. Drying the garment after a wash cycle has a beneficial effect as it reactivates the garment’s water-repellent treatment. Jeans ●This is a programme for jeans made from denim cotton. It can also be used on other garments made from the same material, such as jackets. [. . . ] If an automatic programme has not detected the final dampness level required in this interval, the dryer completes the programme and stops. Check the above points and repeat the programme; if the items are still damp, contact the Technical Assistance Centre (see Assistance). €¢ This is normal, especially if the dryer has not been used for a long time. If the noise persists during the entire cycle, contact the Technical Assistance Centre. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT IDCL85BH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT IDCL85BH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.