User manual INTEGRA RESEARCH DTR-10.5 C-HDXM

[. . . ] B 100mA C 100mA MAX. PR D OUT 100mA MAX. E 100mA MAX. Y MAIN ZONE 2 PB ZONE 3 T VIDEO IN Y REMOTE CONTROL K 12V TRIGGER OUT A 200mA MAX. PB ANTENNA MAX. B 100mA C 100mA MAX. PR D 100mA MAX. E 100mA MAX. Y FM MAIN 75 ZONE 2 PB ZONE 3 AM PR IN OUT IR Remove the hexagon screws, one top and one bottom of slot "K, " using the provided Allen wrench in the same way described below. Next, introduce the hand screws attached to the board into the top and bottom screw holes, and drive them in as deep as about 3/ 16" (5 mm). Hold the screw heads to pull out the board. PR IN OUT IR Using the provided Allen wrench, loosen the hexagon screws, one top and one bottom of slot "K, " to remove the sub-panel from the rear panel. [. . . ] Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into humanreadable form. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. XM Ready®, XM Public RadioTM are trademarks of XM Satellite Radio Inc. All other trademarks are the property of their respective owners. Connecting the XM Passport System The XM Passport System is sold separately. You can purchase the XM Passport System from the XM Web site at: http://www. xmradio. com (U. S. A. ) http://www. xmradio. ca (Canada) Connect the Passport System to the XM antenna jack on the board. XM antenna jack Put the XM Passport System by a southerly facing window, with nothing obstructing its path to the sky. 5 You can use your main unit and the remote controller supplied with your main unit to perform XM Radio operations. The following table shows the button names of the main unit and of the remote controller, respectively, and their corresponding operations. XM Radio Operation FM-AM-XM band select Channel Up/Down Category Up/Down Search Mode select Previous Channel Display Preset Preset Clear Preset Up/Down Direct Tuning Setup Up/Down Setup Left/Right Setup Enter Main Unit button names TUNER/Tuner selector CONTROL/TUNING dial Tuning Up/Down, / Push SELECT/PRESET dial Remote Controller button names Scroll wheel / / TUNING MODE/Tuning Mode EXIT/Exit DISPLAY/Display MEMORY/Memory MEMORY + TUNING MODE Memory + Tuning Mode SELECT/PRESET dial Preset Up/Down SELECT/PRESET dial, CONTROL/TUNING dial, / / ENTER/Enter RETURN/Return DISPLAY/Display CH +/­ DIRECT TUNING and Number buttons / / / ENTER/Enter Push SELECT/PRESET dial, Enter * In this Instruction Manual, all the button names are essentially provided in capital letters. On some models, however, the names may be different and written in small letters except for their initial character. Refer to the above table for proper operations. 6 Setting the Satellite Radio Mode Signing Up for XM Satellite Radio Before you can use XM Satellite Radio, you must first sign up for an account. You'll need a major credit card and your XM Satellite Radio ID, which you can get from the main unit, as explained below, or from the Passport System package and itself. 1 2 3 4 5 Press the [SETUP] button. Use the [ ]/[ ] buttons to select "Hardware Setup, " and then press [ENTER]. Use the [ ]/[ ] buttons to select "SAT Radio, " and then press [ENTER]. Use the [ ]/[ ] buttons to select "XM. " None: Select if you're not using satellite radio. Press the [SETUP] button. 1 Use the [ ]/[ ] buttons or CONTROL/TUNING dial to select "RADIO ID. " Your XM Satellite Radio ID number is displayed. ID 2 Selecting XM Satellite Radio To sign up, go to: http://activate. xmradio. com Or call: 1-800-967-2346 For XM Canada, go to: http://xmradio. ca Or call: 1-877-GET-XMSR 1 Press the [TUNER] input selector button repeatedly to select XM. Notes: · "RADIO ID" cannot be selected in Category Search mode. · The following letters are not used in XM Satellite Radio IDs: I, O, S, F. 7 Selecting XM Radio Channels There are three ways to select XM radio channels: · Channel Search mode: select any channel. I Channel Search Mode 2 Use the [ ]/[ ] buttons to select a category, and use the [ ]/[ ] buttons to select a channel in that category. Or push the SELECT/PRESET dial to select a category, and rotate the CONTROL/TUNING dial to select a channel in that category. 1 Press the [ENTER] or [TUNING MODE] button to select "Channel Search" mode. I Direct Tuning You can select an XM radio channel directly by entering its number by remote controller. 1 2 Use the [ ]/[ ] buttons or CONTROL/TUNING dial to select a channel. You can also use the [ ]/[ ] buttons or push SELECT/PRESET dial to select a category. Press the [DIRECT TUNING] button. 2 I Category Search Mode Within 8 seconds, use the number buttons to enter the channel number. For example, to select channel #20, press 0, 2, 0, or 2, 0, [ENT]. 1 Press the [ENTER] or [TUNING MODE] button to select "Category Search" mode. Selecting the Previous Channel: To listen to the previously selected XM channel, press the [RETURN] or [EXIT] button. 8 Presetting XM Radio Channels You can store a combination of up to 40 of your favorite XM channels and AM/FM radio stations as presets. I Selecting Presets 1 To select a preset, use the SELECT/PRESET dial or Preset Up/Down buttons, or the remote controller's CH [+/­] button. 1 2 3 Tune into the XM channel that you want to store as a preset. While the MEMORY indicator is displayed (about 4 seconds), use the SELECT/PRESET dial or Preset Up/Down buttons to select a preset number from 1 through 40. Repeat this procedure for all of your favorite XM channels. I Deleting Presets 1 2 Select the preset that you want to delete. [. . . ] Song Title/Artist information Displays the song title and artist name on air. Song Title information (TITL) Displays the song title on air. Note: Multicast channel is not available in AM broadcast. 13 Receiving RDS Radio RDS stands for Radio Data System and is a type of FM broadcasting. RDS was developed within the National Radio Systems Committee (NRSC) and is available in the North America. Many FM stations now transmit RDS signals which contain additional information. [. . . ]