User manual IROBOT ROOMBA 630

[. . . ] You’ve joined the millions of people who clean with robots the smarter way to get it done. Please take a few moments to read this manual and get acquainted with your Roomba, to get the best performance from your robot. Register your robot to instantly activate your warranty and enjoy these exclusive benefits: • Take advantage of iRobot’s award-winning customer service Get support tailored to your specific robot, including answers to questions, maintenance tips, video demos, live chat and more. €¢ Get product updates and other valuable information Be among the first to find out about new robots, exclusive discounts and special promotions. [. . . ] When Roomba has completed cleaning, it will use the Lighthouse to navigate back to the Home Base for recharging. Lighthouse Home Base Room 1 Room 2 Lighthouse Start Roomba here With two Virtual Wall Lighthouses in lighthouse mode, Roomba will clean Room 1 for approximately 25 minutes, then clean Rooms 2 and 3 for 25 minutes each, and then return to the Home Base. Room 3 TIP: When in Lighthouse mode, do not manually move Roomba from room to  room while it is cleaning. Com 15 Virtual Wall® Lighthouses™ (continued) In Lighthouse mode, place the Virtual Wall Lighthouse in the doorway between two rooms with the iRobot logo facing forward. Place Lighthouse in the center of the door frame Virtual Wall Mode In Virtual Wall mode, the Lighthouse creates an invisible barrier that Roomba will not cross. In Virtual Wall mode, place the Virtual Wall Lighthouse in the center of the door frame. It blocks an opening up to seven feet or longer in three increments: 0-3 ft. Range Selector Distance TIP: Avoid placing Virtual Wall Lighthouses too close to each other, the  Home Base, or furniture that could block the beams. Doing so could prevent Roomba from recognizing the Lighthouses and navigating to the next room. 3 Install three “AA” batteries into the Command Center. 4 Hold down the left drive button while installing the fourth battery. 5 Continue holding the button for 3 seconds or until the days of the 6 Install the battery door and place the Command Center on top of week lights flash in a sequence from right to left (Saturday to Sunday). 7 Press and hold the DAY and MINUTE buttons on the Command Center for 2 seconds. The lights on the Command Center will flash to indicate the pairing has completed, and Roomba will make a two-tone beep. IRobot Roomba 500 Series 8 When the Command Center is powered on from now on, the lights will 18 Remote Control (optional accessory for selected models) SPOT Button CLEAN/Power Button Directional Buttons . button The Remote Control lets you conveniently control Roomba’s functions. You can use it to turn Roomba on and off and steer it around your room without bending down. It also gives you remote access to these commands: SPOT Roomba spirals approximately three feet in diameter and then spirals back to where it started, intensely cleaning a local area. Roomba automatically calculates the room size and adjusts its cleaning time appropriately. Models 600+ Before using your remote for the first time, install 2 AA batteries (not included). TIP: Check that there is a direct line of sight from the Remote Control to  Roomba and that the remote is pointed at Roomba. t  he Remote Control , Virtual Walls and Home Base operate using an invisible infrared beam. [. . . ] Why doesn’t Roomba slow down as it approaches certain obstacles?Roomba uses its Light Touch Bumper technology to identify walls and other obstacles, allowing it to slow down and gently touch the obstacle with its bumper before changing direction. Roomba may be less effective at sensing and slowing down for extremely dark or black surfaces, or for objects that are less than two inches wide. To reduce the risk of injury or damage, keep these safety precautions in mind when setting up, using and maintaining Roomba: GENERAL SAFETY INSTRUCTIONS • Read all safety and operating instructions before operating Roomba. [. . . ]