User manual IRRADIO DTR-3331

[. . . ] In the box Included in this package should be: Read these instructions before use. Insert two AAA batteries, make sure to match "+" and "-" of the batteries to the marks in the battery compartment. Control DVB-T Receiver Point it at the front of the remote receiver; press the relevant button to choose demand function. The remote control will work up to 6 metres from the DVB-T Receiver and at an angle of up to 45 degrees. [. . . ] When the cursor stops on Area 5 in Daily Mode or Area 6 in Weekly Mode, press the <YELLOW> key to choose the detailed information corresponding to the current program, as shown in the below Figure. Press <|<< & >>|> key to switch among Sunday ---Saturday in Area 3; When the cursor stops in Area 5 Daily Mode and Area 6 in Weekly Mode, press the <BLUE> key to enter Wakeup Timer menu to book programs, as shown in the Paragraph 6. If you want to watch teletext, please press <TEXT> on the remote controller to enter Teletext page. Press Up to go to the previous page; while press key <Down> to go to the next page. Press <Left> to back for 100 pages; while press Right to advance for 100 pages. To see the apitation information, press <SUB-TITLE> key to enter Subtitle menu of the current programs, as shown in the below Figure. Press <LEFT/RIGHT> key to choose whether to open Subtitle, press <UP/DOWN> key move upward and downward to choose language, as shown in the following figure. Press key <LEFT> or <RIGHT>, it will popup device list menu, you can choose one folder as the recording device. After selecting device, press key <EXIT> to exit device list menu. Then press key <REC>, you can record current TV program into selected device. If there is no signal or poor signal, it will popup message "REC PAUSE". In EPG menu, you can choose Timer by pressing blue key to setup wakeup timer window. once you choose wakeup mode as "RECORDER" , one EPG recording is setup. Under menu item "CONFIGURATION", you can choose wakeup timer to enter EPG recording setup. For both ways, you should select timer number from 1 to 10; select timer mode as "ONCE", "DAILY", or "WEEKLY"; choose wakeup date, and on time and duration. In the main menu, you can enter "DISK MANAGER" menu item to operate delete or play function. The DVB-T Receiver contains a facilitated user interface, this function is to make user easy to call all device functions. You can enter the page via(MENU->Digital TV Channel manager) When no menu is appeared on the screen, you press the <MENU> key that will display the main menu. When menu is appeared on the screen, you press the <MENU> key or <EXIT> key to return to the up-level menu. <OK> key: When you press the key that will go to current sub-level menu item. It will pop up dialogue box prompting that "Channel not available" if there are no channels in database, and it will not enter channel organizer page. It will pop up "Channel not available"if there are no programs in database, and it will not enter into channel sorting page. [. . . ] System Setup menu can provide convenient system setup, you can via menu( MENU->Digital TV->Configuration -> System Setup) enter System Setup menu , as shown in the below Figure. Here, you can set up time mode, Date, time, and GMT offset, summer time. If you want to set channel playing at certain time or giving some hint information such as Birthday. You can set up it via Wakeup Timer menu, as shown in the below Figure. [. . . ]