User manual JBL CINEMA SB200

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JBL CINEMA SB200. We hope that this JBL CINEMA SB200 user guide will be useful to you.


JBL CINEMA SB200 : Download the complete user guide (28540 Ko)

Manual abstract: user guide JBL CINEMA SB200

Detailed instructions for use are in the User's Guide.

[. . . ] Power switch: Set this switch to the “On” position to activate the soundbar. In normal operation, this switch will be left in the “On” position. IMPORTANT: Do not connect the power cord to an AC outlet until you have made and verified all other connections. If you will not be using the soundbar for an extended period – for instance, if you’re going on vacation – set the Power switch to the “Off” position. [. . . ] €  et the soundbar’s EQ switch in the “Table” position.  fter reading the Connections section on page 4, connect all cables A to the soundbar. IMPORTANT: Do NOT plug the soundbar’s power cord into an AC outlet at this time. €  et the soundbar’s EQ switch in the “Wall” position, and set the S soundbar’s Power switch in the “On” position.  ttach the soundbar to the bracket by sliding the bracket’s upper A tabs into the slots on the back of the soundbar. The soundbar’s slots allow you to adjust the soundbar’s angle on the wall to ensure that it is level. Insert Tabs on Bracket into Slots on Soundbar WALL-MOUNTING THE SOUNDBAR If your TV is attached to a wall, you can use the included wall-mount bracket to mount the soundbar on the wall directly below the TV screen. Make sure that  the top of the soundbar will not block your view of the TV screen when it is mounted on the wall. Hold the bracket against the wall as a template and mark the  locations of the soundbar wall-mount bracket holes on the wall. The three holes should be evenly spaced 7-1/16" (18cm) apart, and the bracket slots are designed to accept 4mm screws. Making sure that the bracket’s flat side is against the wall, attach  the wall-mount bracket to the wall at the locations you marked, using hardware that is appropriate for the wall’s construction and materials. Com 3 English CONNECTIONS SOURCE CONNECTIONS Analog: Use the supplied stereo audio cable to connect the soundbar’s Aux (analog) input to your TV’s stereo audio output. If your TV has two sets of audio output jacks, use the set that has a fixed (not variable) output level. This will let you turn your TV’s speakers all the way off while the TV still supplies a constant audio signal to the soundbar. Digital: If your disc player, cable tuner or satellite tuner has an optical digital output, you can use the supplied optical digital audio cable to connect it to the soundbar’s Optical (digital) input. NOTE: If your disc player, cable tuner or satellite tuner does not have an optical digital output, you can connect its analog audio output to your TV. The TV will send its audio signal to the soundbar through the analog connection described above. Remove Caps Disc Player or Cable/Satellite Tuner Optical Cable (supplied) TV Audio Cable (supplied) 4 ADJUSTING THE SYSTEM’S VOLUME Press the soundbar’s or remote’s Volume + and – buttons to raise and lower the system’s volume one step at a time. Volume Buttons Volume Buttons BOOSTING THE BASS Press the remote’s Bass Boost button to enhance low-frequency performance, resulting in bass with more impact, which you may prefer while watching movies or listening to music. Pressing the Bass Boost button again will return the soundbar’s normal low-frequency performance. BASS BASS Bass Boost Button For the best sound, we recommend turning your TV’s built-in speakers off. Consult your TV’s owner’s manual to find out how to do this. [. . . ] JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc. Features, specifications and appearance are subject to change without notice. Insérer les crochets du support dans les fentes de la barre de son INSTALLATION DE LA BARRE DE SON SUR UN MUR Si vous avez fixé votre téléviseur au mur, vous pouvez utiliser le support mural fourni pour installer la barre de son directement sous le téléviseur. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL CINEMA SB200




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL CINEMA SB200 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.