User manual JBL EVEREST DD55000

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. FCC regulations FCC InFormatIon For Users This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. radIo and televIsIon InterFerenCe This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures: · Increase the separation between the equipment and receiver. · Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits. · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by JBL could void the user's authority to operate the equipment. iC statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. ImpoRtANt Note foR All electRoNIc pRoducts: Before inserting or unplugging audio cables from the source device's headphones or line-level output jacks, it is good practice to turn off the device first. This will prolong the life of your unit, help protect your device from static electricity and prevent potential damage. 2 JBl On stage®* IV easy setup guIde 1. Carefully unpack your speaker dock and confirm that all the items shown here are included: JBL On Stage®* IV Speaker Dock, power supply, remote control and iPod/iPhone adapter. Notes on battery use: · If you are using rechargeable batteries, make sure that all of them are fully charged before inserting them. · If you are using conventional batteries, make sure that all of them are fresh. When running on AC power, the JBL On Stage IV will automatically enter the standby mode after the system detects no audio signal for 10 minutes. As above, it will return to normal operation upon detecting an audio signal, and the LED will light up. Notes on battery power operation: · The JBL On Stage IV will not charge rechargeable batteries. · The JBL On Stage IV will not charge a docked iPod/iPhone while under battery power unless it is also connected to a computer via a USB cable. ipod/iphone chargIng The JBL On Stage IV will charge a docked iPod/iPhone under these conditions: · When the JBL On Stage IV is being powered by its AC power adapter · When the JBL On Stage IV is connected to a computer via a USB cable The JBL On Stage IV will not charge a docked iPod/iPhone while under battery power unless it is also connected to a computer via a USB cable. www. jbl. com 7 English trOuBleshOOtIng yOur JBl On stage IV prOBleM No sound (white led is not illuminated): sOlutIOn · akesurethatthepowersupplyisproperlyconnectedtotheJBLOnStageIVand M to a working AC outlet. ·fyou'reusingbatterypower, replaceallsixbatterieswithbrand-newdisposableor I freshly charged rechargeable batteries. · heJBLOnStageIVisintheenergyconservationmode(ithasdetectednosound T for at least 10 minutes). No sound (white led is illuminated): · ouchtheVolumeUp(+)buttontoincreasethesystemvolume. T ·fyou'reusingadockediPod/iPhone, makesurethatitisproperlydockedintheJBL I On Stage IV. ·fyou'reusinganauxiliarysource, makesurethattheaudiocableisproperly I connected to the JBL On Stage IV's Audio In connector and to the source component's audio output. · akesurethattheiPodorothersourcecomponentisnotinthePausemodeand M that its volume control is not turned all the way down. sound crackles, hisses or is distorted: loud hum or buzzing: · urntheiPodorothersourcecomponent'svolumedown. [. . . ] sound crackles, hisses or is distorted: loud hum or buzzing: · urntheiPodorothersourcecomponent'svolumedown. T · akesurethattheiPod'sEQsettingissetto"Off. " M · akesurethattheaudiocableispluggedallthewayintotheAudioInputjack. U 8 prOBleM maximum volume level is reduced: sound comes from only one speaker: sOlutIOn · heJBLOnStageIVisinbatteryconservationmode(BCM). SwitchtoACpowerfor T higher performance. · akesurethattheiPod/iPhoneisproperlyseatedallthewayintothedocking M connector. [. . . ]