User manual JBL GTO607C

[. . . ] Although these instructions explain how to install Grand Touring Series component systems in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself ­ instead, ask your authorized JBL car audio dealer about professional installation options. [. . . ] · For door installations, check the clearance with the windows throughout the range of the window's travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism. · If mounting speakers elsewhere, check for clearance around rear-deck torsion bars, glove box or other structural elements. · If possible, select a mounting site for the crossover network that is near the speakers and provides easy access for connections. INSTALLATION Figure 1. Mounting the woofer in a factory location without the grille (except GTO607C). Figure 2. It is designed to be installed under the factory grille. ) 2 INSTALLATION INTERMOUNT III* MOUNTING RINGS The GTO607C is packaged with two different speaker adapters. The adapters will allow the speakers to be installed into various factory 6, " 6-1/2" and 6-3/4" openings. The metal adapter can be mounted in many European vehicles, Japanese vehicles or vehicles with 6" speaker locations. The plastic adapter can be mounted in many vehicles using 6-3/4" speaker locations or three-point mounting frames. Mounting the tweeter using the I-Mount flush-mounting kit. 3 TWEETER ANGLE Figure 6. Aim the tweeter at the listening position by sliding the screw in the groove on the back of the tweeter cup and lock the tweeter in place using the small retaining screw. Rotate the entire assembly in the mounting surface and tighten the large hand nut. 3 ROTATE ENTIRE ASSEMBLY TO AIM ANGLED TWEETER TOWARD LISTENER. Figure 7A. Surface-mounted behind grille panel. 1 2 1 SLIDE BLACK (--)SCREW UP OR Figure 7B. Flush-mounted to surface behind grille panel. SURFACE-MOUNT (--) Figure 5B. Mounting the tweeter using the SMALL LUG BLACK I-Mount surface-mounting cup. 1 ATTACH BASE WITH SCREWS, THEN: DOWN TO ADJUST TWEETER ANGLE. 2 RED (+) BLACK (--) TIGHTEN SCREW TO LOCK ANGLE SETTINGS. 4 RED (+) RED (+) LARGE LUG 2 3 SECURELY TIGHTEN THE LARGE HAND NUT. Figure 7C. [. . . ] Not all models are available in all markets. Declaration of Conformity JBL, Incorporated 250 Crossways Park Drive, Woodbury, NY 11797 USA 516. 255. 4JBL (4525) (USA only) www. jbl. com © 2006 Harman International Industries, Incorporated. JBL, Harman International and Grand Touring Series are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. [. . . ]